Welcome to B2BAGE
air operated lifting equipment
air operated lifting equipment

Minimum Order: 0
Quality/Safety Certification: 0.00


air operated lifting, model no,:6UNITS/CTN,G.W.:24KGS. PACKING SIZE:49*25.5*26.5CM,4UNITS/CTN,G.W.:16KGS,PSIZE:33.5*25

This tool fits with the bottle jack of capacity under 50 ton, which can make handle operated jack become air operated one. Users can only buy this equipment together with inhere jack for combination use. That will not affect its inhere function and can accomplish the air operated function. It deeply liberates out the original car homework, and enhances work efficiency in times. Safety credibility, low cost, convenient installment, simple operation, work labor saving, light weight, long life duration, which is the perfect equipped tools of car repairing industry to lift cars,

2 . Chief parameters:

NO.

Parameter

Parameter value

No.

Parameter

Parameter value

 

1.

Biggest output pressure

80Mpa

4.

Work range

Of pillar piston theory

30mm

2.

Compressed air pressure

1.2Mpa

5.

A pillar piston diameter

8

3.

Compressed air pump cubage

06

6.

Whole  machine weight

2.5Kg

 

3. Installs and operation (look at the installment breakdown diagram) .

a. Disassembly the small oil cylinder from the handle of bottle jack, put alum washer Into the screw hole, assembly the nut of high pressure pump into the removed small oil cylinder, screw the nut tightly.

b. With the gas from air pump, turn on gas entrance switch, hear toot, toot..Voice, that illustrate lifting equipment has already came into work status, if the bottle jack do not rise, you should screw loosely the recycling oil valve of bottle jack in anticlockwise. When it has worked for 25-30 seconds, wait until the air is eliminated out from the piston of this air operated lifting equipment, then it will come to normal work status. When you screw tightly the recycling oil valve of bottle jack in clockwise, at this time, the piston of jack rises, it completes the rising job. Close the gas entrance switch. Slowly screw loosely recycling oil valve of bottle jack in anticlockwise again, the piston will fall down.

c. That Operating frequency is fast or slow down can be accomplished by adjusting the large or small qty of gas entrance switch.

4. Equipment's maintenance:

a. To ensure lubrication in cylinder, each time add a little amount sewing machine oils (can not add machine oil) to the oil entrance hole, which can enhance efficiency, prevent cylinder from scratching and rusting, prolong service life.

b. Install oil water separator to the gas power, it will prevent water, sand and dust coming into cylinder.

c. After half a year use, should take apart this equipment to wash by kerosene, add suitable sewing machine oil for lubrication.                         

Ads by Google



About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 B2BAGE Limited and/or its subsidiaries and licensors. All rights reserved.