test bench
1.digital display
2.test injectors of BOSCH, SIEMENS, DELPHI, DENSO.

test bench                                                                                                                                       

     CRI-200 test bench is the special device to test the performance of high-pressure common rail injector assembly, it is installed the BOSCH common rail pump to provide 0~2000 bar of rail pressure,it can test injectors of main producers:BOSCH,SIEMENS,DELPHI and DENSO.         

>>>CHARACTERISTIC:  

1. Main motor drive adopts the frequency change to adjust the speed.

2. It is installed  BOSCH common rail pump to provide 0~2000 bar of rail pressure.

3. The drive signal percentage can be controlled.

4. Protection function of short-circuit.                                                                                                   

5. The rail pressure can be tested in real time, it contains the high-pressure protection function.

6. Pulse and frequency of the injector drive signal can be adjusted.

7. The injection time can be setted.                                        

>>>FUNCTION:

1. Test the max. oil quantity of high-pressure common rail injector. 

2. Test the cranking oil quantity of high-pressure common rail  injector.

3. Test the backflow oil quantity of high-pressure common rail  injector.

4. Test the average oil quantity of high-pressure common rail  injector.

5. Set the high-pressure common rail injector' injection state and oil quantity measure.

>>>Technical Parameter

1. Test frequency of injector: 50-3000rpm;

2. Pulse width: 0.1-200ms;

3.Test injection time: 1-300s;

4.Rail pressure: 0-200mpa;

5.Graduate: 120ML;

6.Input power: AC 380V/50HZ/3Phase or 220V/60HZ/3Phase or on request;

7.Fuel temperatue: 40°C;

8.Overall dimension: 1200MM×800MM×1600MM;

9.Weight: 400KG.