Welcome to B2BAGE
HX-CS Excellent water-resistant construction sealant
HX-CS Excellent water-resistant construction sealant

Minimum Order: 0
Quality/Safety Certification: 0.00


1.environment friendly
2.high solid content
3.excellent cohesiveness
4.excellent water-resistant
5.good aging-resistant

Product characteristics

Environment friendly: non-toxic, tasteless, non-pollution. Ease of use: it can be use out of box.High solid content, small shrinkage after the construction material is dry and solid. Excellent cohesiveness.Excellent ability of water-resistant, chemical corrosion-resistant, weather-resistant and aging-resistant.

 

Application scope

1. Can be widely use in the waterproof and sealed of aluminum-plastic doors and steel window and door.

2. The waterproof and sealed of building exterior wall cracks, building cracks, road and bridge cracks.

3. Can be used as bonding agent or exterior wall decoration coating, too.

 

 Package and storage

1.Plastic barrels sealed packaging, 1kg/pail 7kg/pail.

2.Storage temperature 5°C~26°C.Be storage in cool dry place, against sunshine and frozen.

   Since the day of production the expiry time is 12 months. It can still be used if it beyond the expiry time while it’s tested qualified.

 

Key points of construction

1.Pretreatment

move away the water and dust on the cracks, holes, and joint cracks that being to be sealed. The loose crack should be cut new and clean the mortar and dust in the cracks. It suggests that clean the crack with water before filling out the crack, and do not construction until it dry.

2.Crack fill construction

 use knife or scrapper scratching the well mixing sealant on the construction part. The scratching should be compact, no bubble is allowed. The construction is about 2~3 times, and compacting and floating it at the last time.

 

 

Performance indexes (executive standard: JC/T 484—2006)

No.

experimental projects

                 technical indicators

1

Appearance

No agglomerated, No segregation,

even delicate cream

2

Density(g/cm3)

1.8±0.1

3

extrusion characteristic(ml/min)

≥100

4

Surface drying time (h)

≤24

5

Elongation (%)

≥100

6

Droop degree(mm)

≤3

7

Low temperature and flexible(°C)

-5

 

Notices

1. Construction temperature should be above 5 oC.

2.Open-air project avoid rainy days or avoid construct on base surface with water.

 

Ads by Google



About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 B2BAGE Limited and/or its subsidiaries and licensors. All rights reserved.