1.green product
2.high elastic,excellent water-resistant
3.good ageing resistance
4.excellent chemical corrosion-resistant
Product introduction
HX-511 is a emulsified and organic solvent-free single component waterproof coating adopting overseas advanced technology, which use high quality polymer emulsion as the base component addition with compounding agent, packing and pollution free li-river water. After painting it can form high elastic, tough, none joint and good weather resistance waterproof coating. What’s more it can add different color to mix to colorful coating to beautify environment and it’s a class new type of environment protection waterproof coating.
Product characteristics
1. It is green products, non-toxic, tasteless; easy and safety construction.
2. Could be direct use on dry or wet (no visible water) base surface.
3. High elastic coating, excellent water-resistant and Chemical corrosion-resistant
4. Excellent light reflection ability and ageing resistance. Good for building energy saving and environmental protection.
Application scope
Can be widely use in Leak-proof, anti-seepage of building roof, underground projects, interior and exterior wall, kitchen, lavatory and pool.
Packaging and storage
— Plastic Barrels Sealed Packaging
— Packaging specs: 1kg/pail, 5kg/pail, 25kg/pail
— Be storage in cool dry place, against sunshine and frozen. Since the day of production the expiry time is 12 months. It can still be used if it beyond the expiry time while it’s tested qualified.
Performance indexes (executive standard: JC/T 864—2008)
No. | experimental projects | technical indicators | ||
Ι | II | |||
1 | Appearance | after mixing not agglomerated and homogeneous | ||
2 | Drying time (h) | Surface drying time | ≤4 | |
Actual drying time | ≤8 | |||
3 | Solids content (%) | ≥65 | ||
4 | Tensile strength(MPa) | ≥1.0 | ≥1.5 | |
5 | Elongation (%) | ≥300 | ||
6 | Low temperature and flexible(10mm stick) | -10°C,no crack | -20°C, no rack | |
7 | Imperviousness (0.3MPa, 30min) | impervious | ||
Notices
1. Construction temperature should be above 5°C. Open-air project avoid rainy days or avoid construct on base surface with water.
2. Do not do second coating until the first coating is dry. The construction of protective layer or decorative layer should be only after the first coating is dry.
Trade item
Port Guangzhou/Shenzhen
MOQ 1Ton/Tons
Lead time 3-5days
Payment 30% advance, 70% balance should be paid once production finished.
