Diesel welding generator
Commins engine 4BTA3.9-G2
Welding and generator
MMA/TIG/FCAW
2 hanles welding
Diesel welding generator
Mainly features for 500X2 Engine-driven Welding Generator .
1. Independent modularize design, supply power for Handle A , Handle B and auxiliary power respectively; non-interfering, never conflict for electricity.
2. Adopted intellectualize start up, stopping control design, and intelligent fault detection system design; reliable for operation and easy to maintenance.
3. Adopted low temperature start up technology, which suit operation at under 4000 elevation with anti-wind, anti-moisture and other functions.
4. It could work at any combination of manual arc welding, down welding, semi-auto welding. With diversify wire feeder interface such as Lincoln, Miller and YUNDA..
Detail Data
Welding supply | Hnadle A(500A) | Handle B (500A) | |||||||
Welding type | manual arc welding | semi-auto welding lincoln/yunda/miller wire feeder | manual arc welding | semi-auto welding lincoln/yunda/miller wire feeder | |||||
No-load voltage | 75V | 0 | 0 | 57V | 75V | 0 | 0 | 57V | |
Welding voltage | 12-30V | 15-40V | 12-30V | 15-40V | |||||
Welding Current | 50-500A | 50-500A | 50-500A | 50-500A | |||||
Duty cycle duration | 60% | ||||||||
Parameter regulation | Preset Current/Voltage | ||||||||
Generator | Model | Stamford | |||||||
power | 48KW | ||||||||
Output Voltage | AC 380V | ||||||||
Frequency | 50HZ | ||||||||
Phases | three phase | ||||||||
Engine | Model | CUMMINS/FX-50GF | |||||||
Fuel | Diesel r/min | ||||||||
PowerKW | Rated 52max 55 | ||||||||
Rated Speedr/min) | 1500 | ||||||||
Starting & stop type | automatic intelligent start and stop | ||||||||
Warning type | when water temperture /oil pressure/rotate speed perform too low possible to preset parameter | ||||||||
Oil tankL | 80 | ||||||||
Complete appliance | Transfer system | Band Truck/Wheeled Driven | |||||||
Weightkg) | 1200kgs(without moving device) | ||||||||
Dimensionmm) | 2300*965*1200 |