hole size: from 2mesh to 500mesh.
Weave: Plain and Twill
use:window screening,fliter,ect.
material:Sus302, 304, 316, 304L, ..
Stainless Steel Wire Mesh
Stainless steel wire mesh square opening we supply comes from 2mesh to 500mesh per inch normally.
Weave: Plain and Twill
Material applied for stainless steel wire mesh: Sus302, 304, 316, 304L, 316L stainless steel wire.
Weaving Patterns applied for stainless steel wire mesh square opening.
Plain Weave:
Each warp wire crosses alternately above and below each weft wire. Warp and weft wires generally have the same diameter.
Specification of Stainless Steel Wire Mesh Plain Weave | |||
Mesh | Wire Dia. (MM) | Opening(MM) | Material (AISI) |
7 | 1.00 | 2.63 | 202 302 304 304l 304ti 316 316l 316ti 310s(2520) 2080 317 410 430 |
10 | 0.60 | 1.94 | |
12 | 0.50 | 1.62 | |
16 | 0.40 | 1.19 | |
16 | 0.35 | 1.24 | |
18 | 0.35 | 1.06 | |
20 | 0.40 | 0.87 | |
24 | 0.26 | 0.80 | |
30 | 0.30 | 0.55 | |
35 | 0.17 | 0.56 | |
40 | 0.23 | 0.40 | |
50 | 0.20 | 0.31 | |
60 | 0.15 | 0.27 | 202 302 304 304l 304ti 316 316l 316ti 310s(2520) 2080 317 410 430 |
70 | 0.12 | 0.24 | |
80 | 0.13 | 0.19 | |
90 | 0.12 | 0.16 | |
100 | 0.10 | 0.15 | |
120 | 0.09 | 0.12 | |
150 | 0.063 | 0.11 | |
180 | 0.053 | 0.09 | |
200 | 0.053 | 0.07 | |
220 | 0.05 | 0.065 | |
250 | 0.04 | 0.062 | |
270 | 0.035 | 0.06 |
Twill Weave:
Each weft wire passes alternately over two, and then under two successive warp wires and each warp wire passes alternately over two and under two successive weft wires. It is possible to be used to allow a heavier than standard wire diameter.
Specification of Stainless Steel Wire Mesh Twill Weave | |||
Mesh | Wire Dia.(MM) | Opening (MM) | Material (AISI) |
250 | 0.040 | 0.063 | 202 302 304 304l 304ti 316 316l 316ti 310s(2520) 2080 317 410 430 |
300 | 0.040 | 0.044 | |
325 | 0.035 | 0.043 | |
350 | 0.030 | 0.042 | |
400 | 0.030 | 0.033 | |
450 | 0.028 | 0.028 | |
500 | 0.025 | 0.026 |
certifications: