1.30 years Excellent track record
2. Classical tried and tested design
3.Made with a cast resin body
4.IEC 62271-209
GIS terminations for polymer cables
GIS terminations were developed for use in SF6 gas insulated switchgears (GIS). Made with a cast resin body, they are designed to fit perfectly into your GIS.
Their main advantages are:
Lightweight
Easy to handle
Classical tried and tested design with high tolerances for cables and applications
Excellent track record in numerous countries and climate zones
In service for more than 30 years at Brugg Cables with outstanding results
GIS terminations for polymer cables profit from the outstanding properties of the prefabricated, one-piece and pretested SiR slip-on stress cones.
All terminations are designed and tested according to international standards, such as IEC 62271-209 (GIS standard), IEC 60840 (≤170 kV), IEC 60071 (insulation coordina
tion) IEC 62067 (>170 kV) or IEEE Std 48-1996. Profit from the advantages of our GIS terminations for polymer cables. All our GIS terminations are designed to be used independently of any type of polymer cable or cable manufacturer from 72.5 to 550 kV and up to a conductor cross-section of 2500 mm2.
Technical data of GIS terminations for polymer cables
Operating voltage Umax/KV | Max. conductor cross-section(Cu/Al) mm2 | Over insulation outer diameter mm | Max. outer diameter of sheath | Type | Creepage distance mm |
72.5 | 1000 | 35 – 80 | 115 | TF1.72-11 | 500 |
145 | 1200 | 57 – 80 | 150 | TF1.170-11 | 690 |
2500 | 80 – 110 | 150 | TF1.170-12 | 710 | |
170 | 2500 | 80 – 110 | 150 | TF1.170-11 | 690,710 |
245 | 2500 | 57 – 110 | 150 | TF1.245-11 | 900 |
300 | 2500 | 76 – 110 | 150 | TF1.300-11 | 900 |
420 | 2500 | 76 – 115 | 170 | TF 1.420-11 | 1385 |
550 | 2500 | 115 – 130 | 170 | TF1.550-11 | 1385 |