Blow Moulding Machine:
1.The daily output(24 hours):about 12,000 to 86,000 bottles
2.Low consumption of electricity and water.
2.5L blow moulding machine(Double Station)
The style is man-machine interface,easy to operate.Double station and single station,from single mould head to six mould head,single layer to six layers,multi layer with transparent line.It can match in-mold labeling,auto-flashing device,crusher recycle system.The daily output(24 hours) can reach approximately from 12,000 to 86,000;it can produce from 0.1-2.5 plastic hollow products.
TECHNOLOGY PARAMETER
Model | SPB-2.5L2JD (Two head) | |
Screw diameter | mm | 55 |
Screw L/D ratio | L/D | 26:1 |
Drive motor | Kw | 15 |
Inverter | Kw | 11 |
Screw rotating speed | r,p,m | 10-85 |
Number of heaters | ZONE | 8 |
Heating capacity | Kw | 9.6 |
Extruding capacity per hour (HDPE/PP | Kg/h | 65 |
PETG/PVC/PC) | Kg/h | 45 |
Extruding mouth outer dia | mm | 80 |
Mold center distance | mm | 130 |
Mold stroke | mm | 150-380 |
Length of mold capacity | mm | 100-350 |
Die width | mm | 100-380 |
Vice-thickness | mm | 150-180 |
Dry cycle per hour | time/h | 1000*2 |
Clamping force | Ton | 5.5 |
Oil tank capacity | L | 150 |
Pressure of air | Kg/cm2 | 6-8 |
Air Volume | m3/min | 0.8 |
Cooling Water pressure | mpa | 0.3-0.5 |
Cooling Water consumption | L/min | 50 |
Min./Max.diameter of product | mm | 30-100 |
Weight of product | g | 10-150 |
Product capacity | L | 1.0 |
Total Electrical Power Rating | Kw | 35.6 |
Average Electrical Power Rating | Kw | 19.5 |
Note:We can offer various mold design service according to customers' individual requirements.
