Welcome to B2BAGE
GF-A1000 automaic computerized hi speed laminating machine
GF-A1000 automaic computerized hi speed laminating machine

Minimum Order: 0
Quality/Safety Certification: 0.00


GF-A1000 automaic computerized hi speed laminating machine depend JAPAN FUJI machine advantage to research and development.

GF-A1000 automaic computerized hi speed laminating machine spec.: 

1typeGF-A1000
2work width1000mm
3machine line speed180m/min
4laminating line speed160m/min
5guide roller width and dia.80*1050mm
6rewiinding and unwinding stationdouble station, auto splicing system
7unwinding max. dia.800mm
8rewinding max. dia.850mm
9heating methodelectric
10electric heating power126kw
11machine total power188kw
12dimension14.5*2.8*4.8m
13machine weightapprox 20tons

  it is for BOPP,PET,NYLON,CPP,CPE,Aluminium foil,paper etc roll form material two layer or multi layer laminated to be high strenth, high fresh keep and steam resistance etc good quality packing material.

1 overall machine adopt PLC tension control and protection to improve machine reliability

2 first and second unwinding, oven,rewindign part with closed loop constant temperature tension,it will be showed and controled by human interface.

3 six section pneumatic open constant temperature oven, air out and intake layering,pressure load design, two times air reback, it is not only save the energy , but also reduce remain solvent content.

4 oven inner guide roller adopt active and passive type, drive adopt synchronous belt wheel to avoid materail pulling and deformation.

5 the first and second unwinding (face film and liner) all adopt EPC air sensitive webguide, the film output of oven adopt EPC inclined webguide

6 hi precision gravure roller coating system, pneumatic doctor blade,uniform roller, glue cycle device.

7 high precition backpress three roller laminating device,laminating roller adopt out cycle oil heating device to make the heating more uniform.

8 coating, laminating machine unit adopt double frequency linkage drive and enter PLC control

9 by cooling roller to make the film more smooth and neat

10 rewinding by two AC vector motor control the taper tension, pneumatic back roller cutting knife and auto splicing to reduce waste

 

 

Ads by Google



About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 B2BAGE Limited and/or its subsidiaries and licensors. All rights reserved.