Provides a beautiful finish w/ a soft gloss
Easy to apply and to repaint
Gives a robust and washable surface
Product properties
Matt, acrylic paint, which provides a beautiful finish with a soft gloss. The product is easy to apply and to repaint and it provides a robust and cleanable surface, which withstands spot-cleaning.
Flutex 10 in coloured shades may come off during the first application phase due to a surplus of pigments. Does not block for strike-through of aqueous colorants, water blotches or nicotine.
| · | Beautiful, flat, saturated and non-reflecting |
| · | Easy and quick to applay |
| · | Great spreading capacity - great covering |
Product application
Suitable interior for walls, e.g. in institutions, offices, living rooms and corridors, where the surface is exposed to dirt and/or wear.
The surface must be clean, dry, solid and suitable for being painted. The pH value of the substrate should be less than 10, and the substrate temperature our recommendation is more than 10°C.. The substrate water content should be less than 10%.
Slightly chalking or absorbent surfaces should be primed with Flugger Sealer.
Apply by brush, roller or by spraying. Depending on the surface and
temperature, 1st coat can be diluted with max. 10 % water.
Technical data
Density: 1.35 kg/liter
Gloss: 10, matt
Solids: Weight%: 56 Vol.%: 40
Spreading rate: 8-10 m2 per liter and treatment (depending on the condition of substrate)
Wash ability Top Level (GB/T 9266-1988)
Water vapour permeability: Sd= 0.21m equal to class 2, according to EN 7783-2Application temp.: Recommended min. working temperature during
drying/curing: +10°C
Max. atmospheric humidity 80% RH
Drying time at 20oC, 60% RH: Dry to touch: 1 h
Recoat interval: 2 h
Fully cured: Several days
Dilution: 1st coat: Max. 10% water
2nd coat: Undiluted
Cleaning of tools etc.: Water
Storage: Cool, frost-free and tightly closed
