Welcome to B2BAGE
water-based interior arylic paint
water-based interior arylic paint

Minimum Order: 0
Quality/Safety Certification: 0.00


Latex paint for ceiling and walls
Low odour and low VOC, matt
Very good hiding power and scrub-resistance

 

Product description                                                            

Type: Latex paint for ceiling and walls, based on acrylic binder with low odour

and low VOC, matt.

Flutex 3 Spec is a low odour easy to apply white acrylic latex paint for interior walls and

ceilings with a very good hiding power and scrub-resistance

 

Product application                                                            

Suitable interior for ceilings and walls.

The surface must be clean, dry and solid. The pH value of the substrate should be less than

10 and the substrate temperature our recommendation is more than 10°C.

The substrate water content should be less than 10%.

 

Cleaning before treatment should be made with Fluren 37, Basic Cleaner.

Slightly chalking or absorbent surfaces should be primed with Flugger Sealer.

Apply by brush, roller or by spraying.

Maybe diluted with up to 20% water, depending on substrate and temperature.

Does not isolate penetration from water-soluble dyes, water blotches and nicotine.

Flutex 3 Spec can be tinted in light color.

 

Technical data                                                                 

Density:                                                      1.45 kg/liter

Gloss:                                                         3, matt

Solids:                                                        Weight%: 57         Vol.%: 37

Spreading rate:                                         8-9 m2per litre(depending on the condition of substrate)

Wash ability                                               Top level (GB/T 9266-1988)

Application temp.:                                     Recommended min. working temperature during

                                                                     drying/curing: +10°C

                                                                     Max. atmospheric humidity 80% RH

Drying time at 20°C, 60% RH:                Dry to touch:       1 h

                                                                      Recoat interval:     2 h

                                                                      Fully cured:        Several days

Dilution:                                                       Water Max. 20% water

                                                                     2nd coat: Undiluted

Cleaning of tools etc.:                              Water

Storage:                                                      Cool, frost-free and tightly closed

Ads by Google



About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 B2BAGE Limited and/or its subsidiaries and licensors. All rights reserved.