Welcome to B2BAGE
BPO & polyester filler
BPO & polyester filler

Minimum Order: 0
Quality/Safety Certification: 0.00


used in iron panel, steel plate, aluminum plate, aluminum alloy plate, galvanized sheet, FRP and on any painted metallic surfac

 

3000 product description (Metal plate poly putty)

Application& Characteristic: This product is multi-purpose polyester putty, matched with BPO hardener. It has property of quick air drying, refined graybody good temperature variation resistance, outstanding application, no sandholes, shrink holes after drying, smooth and glossy after construction, strong water resisting property, and distinctive anti-low&high temperature property,

Scope of construction: It can be used in iron panel, steel plate, aluminum plate, alloy plate, galvanized sheet, FRP and on any painted metallic surfaces.

 

Main performance indexes:

 

Item

indexes

    Test method

Flexibility(mm)

50

GB/T1748

Impact strength(kg.cm)

≥15

GB/T1732

Thermal resistance

1h baking under 120

No bubble, no crack

GB/T1735

Adhesion

First class

Bending method

Sanding time25(min)

30

GB/T1728

Sanding property

Easy sanding,extraction powder is fast

Hand feel

 

Application:

 

Remove the oil, rust, original paint film and water etc from surface completely, keep the painted surface clean & dry before scraping.

The putty may cause uneven in the process of storage, must use clean ruler stir well before the use.

The putty and hardener should be mixed completely to achieve the uniformity of color (general ratio is 100:2 by weight), and apply the mixture within potlife(1-3min), or it will gel.

Apply the mixtured putty to the processed surface of primer or cold-reduced sheet, in case of scraping of thick coat, it is preferable to apply in thin coats for several times till reaching the objective thickness.

Sanding should be made after hardened thoroughly. The best dry milling time is 30min after applying putty, (The temperature is 25, humidity is less than 40%). Ensure the putty has been completely dry when painting, lest drop off or bubbles.

 

Notices:

When there is air bubble while applying, fully scrape to evenness with spatula to ensure good adhesion.

The putty mixed with hardeners should not be returned to the original container, container which is opened must be carefully resealed, lest volatilization &deterioration of solvent. Do not mix lacquer thinner to putty.

When there is low temperature or high relative humidity, curing time of coating will be extended somewhat. The corresponding adjustment can be made to the consistency and gel time of putty according to per customers request.

Our product matches with various primers, but not in phenolic primers and alkyd primers, lest drop off or bubbles. Ensure the primer has been thoroughly dry when applying putty, or cause drop off.

The putty has special hardener,can not match with others.

The shelf life can be up to 12 months at the cool place (under 25).

 

Ads by Google



About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 B2BAGE Limited and/or its subsidiaries and licensors. All rights reserved.