body filler used in iron panel, steel plate, aluminum plate, aluminum alloy plate, galvanized sheet, FRP and on any painted
Main performance indexes:
Item | indexes | Test method |
Flexibility(mm) | 50 | GB/T1748 |
Impact strength(kg.cm) | ≥15 | GB/T1732 |
Thermal resistance 1h baking under 120 | No bubble, no crack | GB/T1735 |
Adhesion | First class | Bending method |
Sanding time25(min) | 30 | GB/T1728 |
Sanding property | Easy sanding,extraction powder is fast | Hand feel |
Application:
1Remove the oil, rust, original paint film and water etc from surface completely, keep the painted surface clean & dry before scraping.
2.The putty may cause uneven in the process of storage, must use clean ruler stir well before the use.
3The putty and hardener should be mixed completely to achieve the uniformity of color (general ratio is 100:2 by weight), and apply the mixture within potlife(1-3min), or it will gel.
4Apply the mixtured putty to the processed surface of primer or cold-reduced sheet, in case of scraping of thick coat, it is preferable to apply in thin coats for several times till reaching the objective thickness.
5Sanding should be made after hardened thoroughly. The best dry milling time is 30min after applying putty, (The temperature is 25, humidity is less than 40%). Ensure the putty has been completely dry when painting, lest drop off or bubbles.
