Auto Paint: GPI-289 Plastic Primer
Minimum Order: 0
Quality/Safety Certification: 0.00
1.Promote adhesion of paint system to plastic parts.
2.Volatile dry plastic primer
3.Suitable for PP,PA,PVC
GPI-289 Plastic Primer
Characteristic: Volatile dry plastic primer, used to promote adhesion of paint system to plastic parts. | |||||||
Substrates | Plastic substrates such as PP,PA,PVC | ||||||
Substrates treatment | Sanding with P600,clean the substrate with GPI-289 degreaser | ||||||
Mixing ratio | Do not need to mix with other products, use directly | ||||||
Pot life | Volatile products, use immediately | ||||||
Spray viscosity | 16-19 Seconds at 20°C | ||||||
No. of coats | 1-2 Coats | ||||||
Flash-off time | 3-5 minutes at 25°C | ||||||
Each sickness | About 10 Micron | ||||||
Spray pressure | Gravity feed 1.3-1.5/3-4kg,Siphon feed 1.5-1.8/3.5-4.5kg | ||||||
Remarks | The plastic primer coating thickness can not more than 25 microns, the next process must be done within 5-10 minutes before it dries | ||||||
Sandability and Polishabiility | No sanded | ||||||
Shelf Life | 2 years in original sealed(can continue to use after passing inspection ) | ||||||
Packaging | 1L | ||||||
Above products are designed for special using, please reference to the label and detailed security parameter , the product users should comply with the health and safe treatment regulations | |||||||
The above technical data is correct, but we don't provides guarantee, because the final result will be effected by the environment and the use of methods. |