Strong adhesion, small shrinkage
Corrosion-resistance to the general chemicals
Beautiful, seamless, dustproof , easy to clean
Description
MF-2000 is a two-component solvent epoxy primer. It has good penetration and sealing power on the porous substrate, such as concrete and water whetstone, etc. It can reinforce the substrate strength and provide good adhesion.
It is also an all-purpose primer for epoxy series paints and used as the undercoat or putty coat after used together with quartz sand or quartz powder
Advantages:
1. Beautiful, seamless, dustproof and easy to clean.
2. Strong adhesion, small shrinkage
3. Corrosion-resistance to the general chemicals.
4. Good abrasion resistance and durability.
Requirements for the base:
1. Concrete strength≥C25;
2. Flatness: the maximum altitude difference of 2M running rule<3mm.
3. The moisture content of the base<4%
Technical Data:
Drying time:
Touch dry: 4 hours
Hard dry: 2--4 days
Compressive strength (Mpa): 80
Impact resistance strength (Kg·cm): 40
Flexural strength (Mpa): 40
Adhesive force grade: 1
Pencil hardness (H): 2
Abrasion resistance(750g/1000r, zero gravity, g)≤0.03
Service life: 5-8 years
Recommended Consumption:
Primer: 0.15kg/sqm
Undercoat: 0.3kg/sqm
Putty layer: 0.2kg/sqm
Quartz Sand: 0.45kg/square meter
Quartz Powder: 0.2kg/square meter
Top coat: 0.3kg/sqm