Welcome to B2BAGE
Metal panel powder coating paints
Metal panel powder coating paints

Minimum Order: 0
Quality/Safety Certification: 0.00


Metal panel powder coating paints
1.non-toxic
2.environmental friendly
3.perfect decorative effect
4.good protection

Metal panel powder coating paints

 

Metal panel powder coating paintsProducts of different gloss are available, namely, high gloss(about80), semi gloss(50-80), flat gloss(20-50),and no gloss(below 20).The gloss can be adjusted according to the customers’ demand

 

Physical properties of the powder

Density:1.4-1.7g/cm3

Granularity distribution 100 below 100 (It can be adapted to the specific demand of the coating)

 

Curing Condition

The normal type:

200°C/10 mins, 180°C/15mins

The special quick curing type:

200 °C/4-5mins

 

Coating performance

Testing items

Standards and methods

Inspecting index

Impact strength

GB/T1732-1993

50/

Adhesion

GB/T9286-1998

Grade0

Bending resistance

GB/T6742-1986

2

Pencil hardness

GB/T6739-1996

1H-2H

Salt mist resistance

GB/T1771-1991

500h

Heat moist resistance

GB/T1740-1979

1000h

Heat resistance

110/24h(all color)

Good gloss retention,

Aberration<0.3-0.4

Attention

1: The tests above used the cold rolling steel plate of 0.8mm thick with preceding standard treatment.The thickness of the coating layer is 60-80um.

2:The above performance index may slightly vary with the variation of the product types and artistic effects.

 

 

Average coating rate

A.     Smooth Surface:

6-12 square meter /kg, film thickness 60μm(calculated according to 100 consuming of powder coating)

B.      Texture Surface

5-7 square meter /KG,film thickness is about 80-120μm 

 

Storage

The products should be stored in ventilated dry and clean room with the temperature below 30°C.Not to be close to fire and heat and kept out direct sunlight.Outdoor stacking is prohibited. On the conditions above. The products can be stored stably for 6 monthes.The product beyond the date of guarantee should be reexamined,and it can still be used if the inspection pass muster.

Avoid inbreathing dust when using the products though the powder coatings are nontoxic.The operations are suggested to wear protective glasses and respirators. Avoid long-term skin touch with the powder if possible.

 

Attention

This technical data is only for user reference,the concrete index is to measure under the terms of suring, in case of the problem can not be solved, please contact the technology department of our company. 

Contact  Person:Penny Zhang

 TEL : 0086 136 7062 8322

 

 

 

 

 

Contact  Person:Penny Zhang

 TEL : 0086 136 7062 8322

Ads by Google



About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 B2BAGE Limited and/or its subsidiaries and licensors. All rights reserved.