Automatic core loading and replacing,Automatic trimming, gluing and sealing,Advanced PLC programmable control technology,
Main features :
1. Automatic core loading and replacing. The logs are automatically pushed out
after fin-ishing winding, and then start winding again. The cores can be
adjusted to any size of cores within one minute.
2. After finished winding the roller pushed out automatically. It's adopt
mechanism arm pusher to push the roller out. The minimum diameter of
finished roll is 60mm.
3. Automatic trimming, gluing and sealing: it has replaced the traditional sealing of
rolls with the international popular trimming and sealing,which can have 10-
18mm tails to facilit-ate to start pulling out the paper.At the same time, it can
greatly cut down the wastage of the paper, thus to cut down the
production cost.
4. Advanced PLC programmable control technology: The winding profiles can be
tight at the beginning of winding, and then getting loose, to avoid the
problems that the cores are loose from the rolls after long time storage.
5. Automatic detection of paper break and paper wrap up: to guarantee the high
quality of the finished rolls even in the high speed operation.
6. Coreless rewinding systemhas changed the traditional method to take out the
core to make high quality solid coreless roller. Reducing the manpower.
7. With high precision screwy perforation knife. With 4 perforation blades to
make clear perforating. The perforating pitch controlled by gear box.
8. Three backstands, pneumatic jumbo roll loading, and pneumatically wide
belt paper unwinding driving, and individual web tension control unit for
each jumbo roll.
9. The web can be threaded on the machine by the two jog buttons, It's
more safety and easier to feed the web.
YD-E |
|
|
|
| |||
Machine Model | 1092 | 1575 | 2000 | 2200 | 2400 | 2600 | 2800 |
Raw Material Width (mm) | 1330 | 1750 | 1950 | 2150 | 2350 | 2550 | 2750 |
Finished Roll Diameter(mm) | Φ60~150 mm ( Tightness adjustable) | ||||||
Finished Roll Core Diameter(mm) | Φ 32~50mm | ||||||
Raw Material Diameter(mm) | Φ 1100 mm (Other sizes are available ) | ||||||
Raw Material Core Diameter | 3"(76.2 mm) (Other sizes are available ) | ||||||
Perforation Pitch(to be appoint) | 4 perforating blade 90~160mm; 2 perforating blade 180~320mm | ||||||
Speed | 180-200 m/min | ||||||
Parameter Setting | LCD Screen operation panel | ||||||
Programmable controller | MITSUBISHI Programmable Controller (PLC) | ||||||
Unwinding Unit | 1-3 ply,15~30gsm | ||||||
Pneumatic System | 3 HP air compressor, Mini pressure 5kg/cm2 Pa(Provided by client) | ||||||
Power | Frequency conversion speed regulator, 5.5-15 kw | ||||||
Dimension(L×W×H) (mm) | 6200x2600x800~6200x4000x800 | ||||||
Weight | 3800~9000kg | ||||||
Option |
| ||||||
Embossing Unit | Single ply embos-sing, double ply embossing, steel to steel embossing | ||||||
Bottom Embossing Roller | Felt roller, Paper roller, Rubber roller | ||||||
Unwinding Unit | 1-3 ply | ||||||
Unwinding Unit Driving | gear box driving | ||||||
Finished roll rewinding | Coreless rewinding system | ||||||
Edge Embossing Unit | Steel to steel | ||||||
Perforating Unit | Pneumatically separating unit | ||||||
Calendering Unit | St, eel to steel, steel to rubber | ||||||
Modem | Option | ||||||
