Welcome to B2BAGE
PM-30 soil moisture meter
PM-30 soil moisture meter

Minimum Order: 0
Quality/Safety Certification: 0.00

1. soil moisture meter
2. soil moisture tester
3. soil ph meter

soil ph meter, soil ph tester, soil moisture meter

Soil PH value is very important factor in the production of quality crops. Most crops cannot survive in soil that is to acid or to alkaline. Therefore the correct PH reading is essential to achieve optimum results.
Usage: To measure the PH and moisture value of different kinds of soil.
Range: PH=3-8 PH  Moisture: 1-8  Resolution: 0.2PH
Accuracy:0.PH suitable for agricultural field and classroom experiments
Operating Temp: 5-50C (41-122 Degrees Fahrenheit)
Calibration: Remove oxidation from metal rings by light phlishing.
Great for quick PH & Moisture of residential:
Gardens Planters   Lawn Maintenance   Greenhouses    Vegetable produce.
1. Remove any obstruction to the soil that requires testiong, such as surface soil, grass, leaves, pebbles, etc.If the soil is dry or contains too much fertilizer, sprinkle some water onto the soil and leave for 25-30 minutes before testing.
2. Before using the tester, be sure to thoroughly clean its metallic surface with a piece of whetting cloth. When using a brand -new tester, we advise you to insert it into the soil a few times before taking your reading, this is in order to remove any oily impurities from its metallic surface that may affect the accuracy of you soil PH or moisture reading.
3.Insert the meter directly into the soil that requires testing, embedding its metallic surface completely and tamping down the surrounding soil so that it adheres closely to the meter’s metallic electrode surface.
About ten minutes after inserting the meter in the soil, the pointer will indicate the  correct value of PH or moisture.
The meter may sometimes register different values depending on the soil condition, adhesion to the meter’s metallic surface, moisture content, etc. Therefore it is advised you take an average of several measurements.
4. Press the white/green button and the pointer will indicate the correct moisture value.
5.After use, wipe the plates clean of soil or moisture.

1. Do not leave the metal part of the tester in the soil for too long(no longer than one hour) or it will damage the metallic surface.
2.Make sure the metallic surface is clean and dry before storing.
3.Do not use the tester near magnetic objects, and keep it away from other metallic objects.
4.Do not measure liquid. This tester is not designed for measuring liquid.
5.Do not hold the tester with fingers on metallic surface. Fingerprints are greasy and reduce the flow of current.

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 B2BAGE Limited and/or its subsidiaries and licensors. All rights reserved.