Welcome to B2BAGE
punching pile driver (building piling, monkey driver) for bridge piling
punching pile driver (building piling, monkey driver) for bridge piling

Minimum Order: 0
Quality/Safety Certification: 0.00


punching pile driver (building piling, monkey driver) for bridge piling with hammer,
pile pit diameter from 600mm to 3500mm,

Punching pile driver suitable for drilling cast-in-place pile construction, it with obvious strongpoint especially on cobblestone and boulder stratum. The operational principle is that lifting hammer then free fall reduplicate punching, crack the earth and rock of hole inside or pile into wall of hole, or make residue suspend in slurry, then hollow muck out by silo or pile wimble.
In despite of punching pile driver construction simply and low speed, but compare with other construction way the construction expend of general calculation is the lowest. Thats why so many construction company choose punching pile driver. At the same time, around hole wall come into being one layer close-grained earth stratum for leveling off hole wall and improving pile load capacity. 

Ads by Google



About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 B2BAGE Limited and/or its subsidiaries and licensors. All rights reserved.