Limited Telescopic Joint
1,ISO9001 and ISO14001
2,Material:steel.rubber
3,DN:65~3200mm,Dw:76~3220mm
412 years OEM experience
Limited Telescopic Joint:
1:Preliminary Description
1) one side is connected with the flange,and the other side should be welded on the pipeline.
2) the product can be connected with valves or equipment for expansation compensation as well as easy for installation and dismantling.It will have axial displacement in operation
2: material
No. | Name | Qty | Material |
1 | main body | 1 | QT450-10,Q235A |
2 | seal ring | 1 | NBR,CR,EDPM |
3 | gland | 1 | QT450-10,Q235A |
4 | limited short pipe | 1 | Q235A |
5 | nut | n | Q235A,20# |
6 | long bolt | n | Q235A,35# |
7 | short bolt | n | Q235A,35# |
3:Dimension
4: Single Flange limited Compensators have been receiving great reputation either at home or abroad for a couple of years.
As shown clearly in the picture,the single flange limited telescopic joint can link with the flange on one side and weld together with the pipe.The distance between this product and pipe and flange should be properly adjusted,and the nuts should be tightened evenly and then the limited nuts should also be set in the right place.