The Rando polyproylene(PP-R) pipe production line is mainly used in producing PP-R resin pipe materials

The PP-R pipe production line is mainly used in producing PP-R resin pipe materials, also used in the PB PPCPE resin pipe material production line.

Main Technical Standards

ExtruderScrew diameter65mm  90mm  120mmRatio of length and diameter30The screw speed20-100r/minMain electrical engineering power37KW  55KW  75KWProduction capacity70-200Kg/hHeating block & power12-14KWCenter height1000mmDie head equipmentHeating methodBand heaterHeating power6-10KWVacuum calibrating deviceVacuum pump power4KW discharge capacity 88m3/h 2 setsCooling water pump modelone set of 2BL-6 4KW two sets of 2BL-6A 3KWVacuum Path Length4000mmCalibrating box vertical motor0.75KWCooling systemCooling trough length4000mmCooling methodspraying coolingDraught deviceDraught pipe diameter20-110mmDraught speed0.2-6m/minDraught motor power3KWCutting deviceCutting pipe diameter20-110mmMax. cutting wall thickness16mmDrive motor power2.2KW

 

 

Production line features
·Human-machine interface, high degree of automation
·Adopting special screw, good effect
·Adopting compound spiral engine head, effectively deleting memory function of the material
·Vacuum shaping, constant temperature control, deleting pipe stress
·Adopting coextrusion engine head to improve the tube mark color line
·Heavy extrusion volume, low temperature of melt, equal temperature of melt
·Extensive material process range

PP-R pipe                       PP-R pipe fittings
 
PP-R pipe system after connection             Construction tools           

Main Technical Standards

ExtruderScrew diameter60/90Ratio of length and diameter30:1The screw speed(r/min)20-180/20-180Main electrical engineering power(KW)110/185Production capacity(Kg/h)150-200/300-350Heating block & power(KW)12-14/18-20Center height(mm)1100/1100Die head equipmentHeating methodBand heaterHeating power(KW)6-10/8-12Vacuum calibrating deviceVacuum pump power5.5KW discharge capacity 88m3/h 1 setVacuum Path Length(mm)6000/6000Calibrating box vertical motor(KW)0.75/1Cooling systemCooling trough length(mm)6000/6000Cooling methodspraying coolingDraught deviceDraught pipe diameter(mm)20-110/50-250Draught speed(m/min)0.5-18/0.2-5Draught motor power(KW)7.5/7.5Cutting deviceCutting pipe diameter(mm)20-110/110-250Max. cutting wall thickness(mm)16/30Drive motor power(KW)2.2/2.2