Welding Steel Tube Mill Line: used for producing round, square, rectangle pipes.
1.Pipe dia.: 8-219mm
2.Thickness: 0.3-8.0mm
Welding Steel Tube Mill Line: used for producing round, square, rectangle pipes, etc.
Pipe dia.: 8-219mmThickness: 0.3-8.0mmSpeed: 0-90m/min
The complete line include the following device:
1) Un-coiler (Option: Manual & Hydraulic)
2) Shear and Butt Welder
3) Accumulator (Option: Vertical and horizontal type)
4) Forming, Welding and Sizing mill
A) Feeding & Leveling device
B) Forming machine
C) Guiding, extruding, Welding & scraping device
D) One set of Cooling water tank
E) Sizing mill
F) Main Driving System
5) Computer-controlled Tracking Cutting Saw (Circular Saw Cutting)
6) Finished Pipe Passing Conveyor (Run out table)
7) HF Electric (Solid State)
8) Pneumatic System with air compressor
9) Electrical System with PLC Control and DC Drive Control System
Technical Parameter:
Model | Diameter of Welded Tubes | Wall Thickness of Welded Tube | Speed of Tube Welding | Power of Major motor | High Frequency Power |
RT16 | Φ8∼25mm | 0.3∼1.0mm | 30∼90m/min | 22 KW | 60 KW |
RT25 | Φ8∼30mm | 0.4∼1.2mm | 30∼90m/min | 30 KW | 100 KW |
RT28 | Φ10∼38mm | 0.6∼1.5mm | 30∼80m/min | 45 KW | 100 KW |
RT32 | Φ13∼50.8mm | 0.6-2.0mm | 20-90m/min | 75KW | 100KW |
RT45 | Φ13∼50mm | 0.8∼2.0mm | 20∼75m/min | 75 KW | 100 KW |
RT50 | Φ15∼63.5mm | 0.5-2.5mm | 20-70m/min | 90KW | 150KW |
RT60 | Φ16∼63mm | 1.0∼3.0mm | 20∼65m/min | 90 KW | 200 KW |
RT76 | Φ25∼80mm | 1.5∼4.0mm | 15∼60m/min | 160 KW | 300 KW |
RT76 Enlarged | Φ32∼127mm | 1.5-2.5mm | 15-50m/min | 90KW×2pcs | 350KW |
RT90 | Φ32∼100mm | 1.5-4.5mm | 15-50m/min | 90KW×2pcs | 350KW |
RT90 Enlarged | Φ60∼140mm | 1.5-4.0mm | 15-50m/min | 110KW×2pcs | 400KW |
RT115 | Φ40∼115mm | 2.0∼5.0mm | 15∼50m/min | 132 KW×2pcs | 400 KW |
RT165 | Φ76∼165mm | 2.0∼6.0mm | 15∼50m/min | 160 KW×2pcs | 600 KW |
RT219 | Φ114∼219mm | 3.0∼8.0mm | 15∼40m/min | 200 KW×3pcs | 800 KW |