Full automated and lower invested gypsum board equipment
Less energy cost
structure simple
advanced technology
best price

Full automated and lower invested gypsum board equipment

Paper Supply System Introduction , the notches played a great help on the subsequent trim and form. Product quality can be greatly improved, and reduce a lot of unnecessary waste and reduce costs.For Powder System Introduction   The system is unique quantitative feeder as the core, so that the supply of gypsum powder very accurate, for the subsequent mixing operation provides great convenience, coupled with the pneumatic discharge device, so that the supply of feed powder has a reliable guarantee.Water Supply System Introduction   The system uses a heat exchanger, above the quality of the product not only enhance the strength, but also saving energy, using more accurate measurement of the specific pump water for the operation to provide a great convenience.Foam System Introduction   The system uses a unique constant pressure air supply device, a dedicated pump for the foam liquid, so that liquid foam into the slurry can be uniform for the operation provides a great convenience, and thus to adjust the weight of the product is relatively easy to grasp.Molding System Overview   This system introduces the technology from foreign, use a unique strong edge of stainless steel vertical mixer with special stainless steel pneumatic plate forming machine, so that the system enhanced the ability of anti-wear greatly and extended service life. It adopts Plate Form Machine instead of The original Lamination, then improve the flatness of the plate surface.Conveyor System Introduction   In addition to the traditional conveyor machine, also increased the waste plate cleaning machine, not only reduces the labor intensity , but also enable the plant sanitation and clean.Transfer System Introduction   The system adopts the most advanced non-powered fast-forward into the body panels to reduce energy consumption, and the various parts of the total made a corresponding improvement, so that the machine run more reliable.Drying System Introduction   This system is the core of the entire production line, which directly affects the production line output and energy consumption. This system uses a unique heat sink structure, floor temperature, temperature control section, superadd the new and unique air distribution system that allows the system of arbitrary adjustable temperature and humidity levels, which played a role in reducing energy consumption and to make the operation of the system is more easy to grasp. Its also the key to reducing test costs.Heating System Introduction   The system uses machine-heat carrier furnace (heat Oil Furnace), which is a low-pressure high-temperature heating device. It is coal, oil and gas as fuel to oil as carrier, is currently the preferred heating gypsum board production equipment. In addition, the use of flue gas heat exchanger to reduce energy consumption and reduce costs.Length System Introduction   The system with unique shutter machine and palletizing unit became the latest cut to length system, thus ending the history of artificial access panels, reducing labor costs.Dust Removal System Introduction   The system uses electronic pulse bag filter to improve the effectiveness of the Chu Chen, and the other an increase of dust auger, to make it easier clean-up dust.Control System Introduction   Control system consists of six aspects of composition, using a computer programmed control, and using an inverter, solid state relays, photoelectric sensors, non-contact devices to ensure reliable operation of the machine. Capable of achieving long-term operation of the automatic gypsum board production line

          The flow