1.one step inject and blow molding
2.Make bottle 3ml-1000ml
3.for pharmacy. Cosmetic,chemical, food bottle
4.Short Cycle Tim
No | Item | Unit | Data | No | Item | Unit | Data | ||||||||
1 | Dia of screw | Mm | 45 | 13 | Die-heating power | Kw | 1.6 | ||||||||
2 | Max. the retical capacity | Cm3 | 286 | 14 | Pressure of hydraulic system | Mpa | 1.4 | ||||||||
3 | Total power for cylinder-heating | Kw | 10 | 15 | Max. working pressure of comp. air | Mpa | 0.8 | ||||||||
4 | Clamping force of injection mold | Qty | 3 | 16 | Discharge rate of compressed air | M3/min | >0.8m3/min | ||||||||
5 | Clamping force of injection mold | Kn | 450 | 17 | Consumption of cooling water | M3/h | 3 | ||||||||
6 | Injection mold Opening stroke | Mm | 70 | 18 | Dimension of machine(L×W×H) | Mm | 4000*1670*2350 | ||||||||
7 | Opening force if blow mold | kn | 52 | 19 | Machine weight | T | approximately 6.0 | ||||||||
8 | Opening stroke of blow mold | mm | 120 | 20 | Range of formability products | L | 0.005-0.8 | ||||||||
9 | Idle time | S | 8 | 21 | Height of formability products | Mm | ≤200mm | ||||||||
10 | Max. plate size of die(L*W) | Mm | 480*390 | 22 | Dia of formability products | Mm | ≤100mm | ||||||||
11 | Min. die thickness | Mm | 240 | 23 | Noxxle thrust stroke | Ton/min | 3.1/200 | ||||||||
12 | Motor power | Kw | 22 | 24 | Cover and area | mm | 4000*5000 | ||||||||
Cavity number of one mold corresponding to products volume.(for references) | |||||||||||||||
| Product volume(ml) | 8 | 15 | 20 | 40 | 60 | 80 | 100 | |||||||
| Cavity quantity | 8 | 6 | 6 | 5 | 5 | 4 | 3 | |||||||
