1.suit for small bottle
2.double pump short the cycle time
3.without any waste and flashing
4.more stability high efficient
1.It adopts only one girder for the injection and blowing positions.
2.It’s hydraulic system is energy-saving, high-efficiency. less return oil, when there is no load in the hydraulic system, oil temperature will be low, it can protect the hydraulic oil.
3.The work table is cast by ductile cast iron, and it is more thick, more strong and more steady.
NO | ITEM | UNIT | AM-25 | AM-35 | AM-45 | AM-60 |
1 | Diameter of screw | MM | 35 | 40 | 45 | 50 |
2 | Injection weight | G | 146 | 176 | 241 | 280 |
3 | Heating capacity | KW | 6.56 | 6.5 | 10 | 10.8 |
4 | Control area of electric-heating | QTY | 3 | 3 | 3 | - |
5 | Clamping force of injection | KN | 280 | 350 | 450 | 600 |
6 | clamping force of blow | KN | 30 | 30 | 78 | 89 |
7 | Opening stroke of mold platen | MM | 120 | 120 | 120 |
|
8 | injector stroke | MM | 200 | 220 | 200 | 200 |
9 | Max. plate size of die(L*W) | MM | 300*200 | 300*200 | 480*390 | 740*390 |
10 | Min. die. thickness(H) | MM | 180 | 180 | 240 | 280 |
11 | Motor power | KW | 15 | 15 | 22 | 30 |
12 | Heating capacity of mould | KW | 2.5 | 3.6 | 3.6 | 6 |
13 | Pressure of hydraulics system | MPA | 14 | 14 | 14 | 14 |
14 | Min. working pressure of comp air | MPA | 0.8 | 0.8 | 0.8 | 1.0 |
15 | Discharge rate of compressed air | M3/min | >=0.8 | >=0.8 | >=0.8 | >=0.8 |
16 | Consumption of cooling water | M3/hr | 3 | 3 | 3 | 5 |
17 | Dimension of machine (L*W*H) | MM | 3100*1100*2200 | 3100*1100*2200 | 4000*1970*2350 | 4200*1340*2350 |
18 | Machine weight | T | 2.5 | 3.0 | 6 | 6.8 |
19 | Suitable bottle Range | L | 0.003-0.6 | 0.003-0.6 | 0.005-0.8 | 0.005-0.45 |
20 | Max. Height of bottle | MM | <=145 | <=145 | <=200 | <=200 |
21 | Max. dia. of the bottle | MM | <=100 | <=100 | <=100 | <=60 |
22 | Conveyer belt motor power | KW | 0.1 | 0.1 | 0.1 | - |
23 | Total power | KW | 25 | 25 | 32 | 40 |