Automatic PET bottle blowing machine
1)3-4cavity blowing machine
2)capacity: around 4000BPH
3)P20 BLOW MOLD

Automatic PET bottle blowing machine
1)3-4cavity blowing machine 
2)capacity: around 4000BPH
3)P20 BLOW MOLD

1. Water chiller

This is to cooling the mold from the high temperature, there by increase the operation speed and extends the mold's life time. Because during the operation, the mold's temperature will go up, we need to use the water or fan type of chiller to cooling down the mold.

2. High pressure air compressor

It is the air source for the PET stretch blowing molding machine, it carries out the process of compression air from atmosphere to the required pressure, in order to blow up the preform into request bottle shape.

3. Low pressure air compressor

It is supply the air for the cylinder's closing, clamping and machine's movement.

It is to clear up the impurities out of the compressed air, like carbon-hydrogen, tiny durst and solid particles.

5. Air cooling dryer

It is to purify, remove and moisture from the compressed air and lower tempearature of the compressed air in the heat exchanger.

6. Air storage tank

It is to receive and supply air for the machine as storage. Only requested by the full automatic, 2 or more than 2 cavity blow molding machine, because these machine consumption more air, evertime compressor produce the air need times, thereby, need the air receiving tank to storage the air.

SPARE PART'S BRAND NAME