This stlye is man-machine interface, easy to operate.
Double station and single satation, from single mould head to six mould head, single layer to six layers, mutli layer with transparent line. It can match in-mold labeling, auto-deflashing device, crusher recycle system. The daliy output(24 hours) can reach approximately from 12,000 to 86,000; it can produce from 0.1-2.5L plastic hollow products.
Specification:
| Blow Molding Machine Model | SPB-2.5L2JD double head | |||
| Screw Diameter | mm | 55 | ||
| Screw L/D Ratio | L/D | 26:1 | ||
| Injection Driving Power | KW | 15 | ||
| Hydraulic pressure Power | KW | 7.5 | ||
| Screw rotate speed | R.P.M | 10-85 | ||
| Screw heating zone | Parts | 9 | ||
| Heating power | KW | 9.6 | ||
| Extruding Capacity HDPE/PP | kg/h | 50 | ||
| PETG/PVC/PC | kg/h | 40 | ||
| Mold mouth duter dia | mm | 80 | ||
| Mold Center Distance | mm | 120/130 | ||
| Mold open-close stroke | mm | 150/350/380 | ||
| Length range of mould | mm | 100-350 | ||
| Width range of mould | mm | 100-380 | ||
| Thickness of mould | mm | 150-180 | ||
| One Dry Circle time | time/h | 1000 | ||
| Clamping Force | Ton | 5.5 | ||
| Oil tank Volume | L | 150 | ||
| Air Pressure | kg/cm2 | 6-8 | ||
| Air Volume | m3/min | 0.6 | ||
| Cooling water pressure | mpa | 0.3-0.5 | ||
| Cooling water consumption | L/min | 50 | ||
| Min./Max. diameter of product | mm | 30-100 | ||
| Weight of product | g | 10-100 | ||
| Volume of product | L | 1.0 | ||
| Total power consumption | kw | 35.1 | ||
| Average power consumption | kw | 19.3 | ||
| Net weight of machine | ton | 4.0 | ||
| Gross with of Machine | ton | 4.4 | ||
| Machine Dimension (L*W*H) | m3 | 3.2*2.1*2.5 | ||
| Package dimension | m3 | 18 | ||
The in mold labelling robot is matchable to our blow molding machine. It has the characters as:
1>resist pirate product
2>the label could not fade even it is placed in humidity environment.
3>appear photo effect after direct printing, improve the grade of packing
4>reduce production procedure
5>save cost and space
