SPB-2.5L4JD Blow Moulding
Minimum Order: 0
Quality/Safety Certification: 0.00
This stlye is man-machine interface, easy to operate.
1> Double station and single satation
2>from single mould head to six mould head
3>single layer to six layers, mutli layer with transparent line.
4>It can match in-mold labeling, auto-deflashing device, crusher recycle system.
5>The daliy output(24 hours) can reach approximately from 12,000 to 86,000;
6>it can produce from 0.1-2.5L plastic hollow products.
Specification:
Blow Molding Machine Model | SPB-2.5L4JD 4 Head | ||||
Screw Diameter | mm | 55 | |||
Screw L/D Ratio | L/D | 26:1 | |||
Injection Driving Power | KW | 15 | |||
Hydraulic pressure Power | KW | 11 | |||
Screw rotate speed | R.P.M | 10-85 | |||
Screw heating zone | Parts | 12 | |||
Heating power | KW | 14.4 | |||
Extruding Capacity HDPE/PP | kg/h | 65 | |||
PETG/PVC/PC | kg/h | - | |||
Mold mouth duter dia | mm | 50 | |||
Mold Center Distance | mm | 75 | |||
Mold open-close stroke | mm | 150/350/380 | |||
Length range of mould | mm | 100-350 | |||
Width range of mould | mm | 100-380 | |||
Thickness of mould | mm | 150-180 | |||
One Dry Circle time | time/h | 1000*2 | |||
Clamping Force | Ton | 5.5 | |||
Oil tank Volume | L | 150 | |||
Air Pressure | kg/cm2 | 6-8 | |||
Air Volume | m3/min | 0.8 | |||
Cooling water pressure | mpa | 0.3-0.5 | |||
Cooling water consumption | L/min | 50 | |||
Min./Max. diameter of product | mm | 20-60 | |||
Weight of product | g | 10-50 | |||
Volume of product | L | 0.2 | |||
Total power consumption | kw | 40.4 | |||
Average power consumption | kw | 22.2 | |||
Net weight of machine | ton | 4.1 | |||
Gross with of Machine | ton | 4.5 | |||
Machine Dimension (L*W*H) | m3 | 3.2*2.1*2.5 | |||
Package dimension | m3 | 18 |
Tongsheng is company that can supply Blow moulding machine, Chiller and Leak Detector. Any infomation you want to know, pls feel free to contact.