1.We acquired ISO9001
2. high output,good plasticization
Use
The extrude,The cylinders and the screw of this extruder all adopt high quality alloy steel,tighten azotizing ,precision process ,Have optimum hardness and strong corrosion resistance after azotizing and precision finishing,It has high output,good plasticization with exspecial designing of the screw .It suitable for blowing plastic film of low density polyethylene(LDPE),high density polyethylene(HDPE)and liner low density polyethylene(LLDPE)etc,which are widely used for packing industrial products,food,clothes,rubbish bag,vest bag and used for farmland.
Main Technical Parameters:
Model | SJ-M-45 | SJ-M-50 | SJ-M-55 |
Raw material | HDPE LDPE LLDPE | HDPE LDPE LLDPE | HDPE LDPE LLDPE |
Max.Width of product(mm) | 100-450 | 100-550mm | 100-800 |
Max.Thickness of product(mm) | 0.01-0.10 | 0.01-0.10 | 0.01-0.10 |
Max.extrusion output(kg/hr) | 25-30 | 30-35 | 35-40 |
Screw Diameter(mm) | 45 | 50 | 50 |
Screw Ratio | 28:1 | 28:1 | 26;1 |
Screw Material | SACM-645/38 CRMOLA | SACM-645/38 CRMOLA | SACM-645/38 CRMOLA |
Charging Barrel Material | SACM-645/38 CRMOLA | SACM-645/38 CRMOLA | SACM-645/38 CRMOLA |
Charging Barrel Cooling | 2 | 2 | 2 |
Mainframe Power(kw) | 7.5kw | 11kw | 13kw |
Charging Barrel Temperature Control | 3 | 3 | 3 |
Die Orifice | ¢60/100 | ¢80/150 | ¢105/225 |
Temperature Controller | 1 | 1 | 1 |
Vane | 1 | 1 | 1 |
Wind Engine | 1.5kw | 2.2kw | 3.3kw |
Up and Down Elevation Type(mm) | 1000mm | 1000mm | 1000mm |
Cite Motor Power(kw) | 0.75kw | 1.1kw | 1.6kw |
Overall DImension(m)(L x Wx H) | 2.2*1.4*2.2 | 2.3*1.4*2.2 | 3.8*2.1*3.5 |