1,8-10s/shift.
2,Soft-start or ABB invertor,
3,high quality and economical price

SRLW300/600 main parameters of mixed units
1, Main technical parameters
Heat 300
A maximum of feeding amount ≤ 100Kg / pot
The total volume of 300L
Effective volume of 225L
Mixing time 10 ~ 12min / pot
Spindle Speed 390/780r/min
Since the frictional heating
Air discharge mode
Discharge air pressure 0.35 ~ 0.45 Mpa
Motor Power 40/55kw
600L Cooler
A maximum of feeding amount 100 ~ 200Kg / pot
The total volume of 420L
Effective volume of 600L
Mixing time (100Kg per pot fell 45 °C) <10 min
Cooling water
≤ 20 °C cooling water temperature
Cooling water pressure ≤ 0.1MPa
Cooling water consumption 2t / h
Spindle Speed 130r/min
Air discharge mode
Discharge air pressure 0.35 ~ 0.45 Mpa
Reducer Model BWL33-11-11
Compressed air consumption unit 600L / h

2, the main electrical components
(1), temperature control device used in Japan RKC temperature controller
(2), the main exchanges and contacts with Siemens products in Suzhou
3 shows the main structure of mixed units
(1), the pot is made of stainless steel (made of 1Cr18Ni9Ti, 6 mm wall thickness of hot mix pot, the bottom 12 mm thick, cold mix boiler wall thickness of 6 mm, lateral 10 mm) welded together, the inner surface is very smooth and hard, with wear and corrosion resistance difficult to stick materials and so on.
(2), hot mix lid is cast aluminum, the surface is fine cars and polishing; it after starting from the cylinder head, back along the vertical axis clockwise rotation level (hot mixed rotation 70 °).
(3), thermal mixing stirrer made of stainless steel casting by 1Cr18Ni9Ti, but also by the careful machining and polishing. Wear and corrosion resistance, life > 15000 hours.
(4), cold mixing machine mixing propeller made of stainless steel, polished, wear, corrosion resistance, long service life. 3 groups impeller.
(5), cold mixing machine spindle through cooling water, cooling effect.