cable manufacturing equipment cable coating machine
screw rpm: 10-100
production scope: 20-80mm
PVC output: 400kg.
cable extruding machine, cable coating machine
1. The application of the equipment:
Applicable to monochrome,two-color,double layer and three layer extrusion of wire and cable made of insulation and sheathing materials such as PVC, LDPE, XLPE, LSHF, TPU.
2. Technical Parameters
1) Production scope: conductor dia. 20mm-70mm
.finished dai.is 25mm-80mm
2) Extrusion capacity: Max 400kg/hr
3) Motor Power: 75kw(frequency conversion)
4) Heating power: 40kw(seven section heating with air cooler)
5) Center height of the machine: 1000 mm
6) Pay-off spool specification: diameter 2500mm(PN 1250-2500mm)
7) Take-up spool specification: diameter 2500mm
8) Voltage class: 380V/50Hz
3. Composition of the equipment
Sequence number | Each parts name | Main technical parameter | Number of units |
1 | 2500mm pay-off | Pay-off bobbin diameter 1000mm-2500mm, End axle structure ,using motor and lead screw to movement lift and down. The movement motor: 1.5kw. Up and down motor :1.5kw , Clamp motor:1.1kw Mechanical friction off tension control, tension size can be adjusted .
| one |
2 | 1000kg air pressure flat tape traction machine | air pressure flat tape structure, maximum traction force is 1000kg, pneumatic clamping and automatic tensioning the traction belt, transmission achieved by the motor and reducer, so the device has low noise but high output energy-efficient, no oil leaking, stable haulage speed, the traction belt are two leather seamless belt, using frequency conversion to adjust the speed, the power of the motor is5.5kw, four stall control, can exchange the stalls optionally according to the needs of product technology.
| one |
3 | XM120/25 Extruder | 120mm Extruder: 250 type Hard tooth surface reduction gearbox., screw, sleave are all made of good Quality38CrMoAL steel materials, processed by nitrogen treatment, screw scale length ratio diameter 25: 1, Screw diameter is 120mm.Designed specifically for processing cable made of insulation materials such as PVC,PE, XLPE. Extrusion motor used 75kw Frequency conversion motor. Host machine used cast aluminum heating , the body with 7 main heating zone,the head with 2 zone,Standard out of the amount of 400kg/h ,Cross head using a free -debug custom core.
| one |
4 | Water sink | Made of 304 stainless steel (1Cr18Ni9Ta) 4 meters x4 Section in length
| A set |
5 | printer | Printing ink printing machine with 2200W pressurized air pump blowing device
| one |
6 | Meter counter | Using electronic counter to count the meters, bevel gear drive.Two rounds crowed to measure meters,the rounds range can be adjusted to ensure the accuracy of the meter.
| one |
7 | 2000kg air pressure flat tape traction machine | air pressure flat tape structure, maximum traction force is 2000kg, pneumatic clamping and automatic tensioning the traction belt, transmission achieved by the motor and reducer, so the device has low noise but high output energy-efficient, no oil leaking, stable haulage speed, the traction belt are two leather seamless belt, using frequency conversion to adjust the speed, the power of the motor is15kw, four stall control, can exchange the stalls optionally according to the needs of product technology.
| one |
8 | diameter 2500mm take-up machine | Take-up drum specification: PN1000_PN2500 Structure is end axle type, Maximum loading capacity is 10t, 4 section variable speed, take-up speed 4-60m/min The movement motor is 1.5kw.up and down motor 1.5kw , Take-up motor is 6kg. m torque motor
| one |
9 | Control box | Used seven areas Intelligent temperature control device, contactor is Zhengtai Electrical Appliance , electric relay is used ORMON, others are home famous brands, Frequency converter is used Weichuang Electrical Appliance, one 75kw ,one 11kw and 40A torque controller.
| one |
10 | Crosshead | right-angle adjustable crosshead,with hole site diameter 90mm | one |
\