1. IV sets parts specail injection molding machine
2. high speed and high precision
|
|
| GS168V | ||
A | B | C | |||
| Screw Diameter | mm | 40 | 45 | 50 |
Screw L/D Ratio | L/D | 22.5 | 20 | 18 | |
Shot size(Theoretical) | cm3 | 253 | 320 | 395 | |
PS) Injection Weight | g | 230 | 291 | 359 | |
PS Injection Rate | g/s | 100 | 126 | 156 | |
PS Plasticizing capacity | g/s | 13.9 | 18 | 21.6 | |
Injection Pressure | Mpa | 240 | 190 | 154 | |
Screw Speed | Rpm | 0-195 | |||
| Clamp Tonnage | KN | 1600 | ||
Toggle stroke | mm | 430 | |||
Space Between Tie Bars | mm | 470*470 | |||
Max.Mold Height | mm | 520 | |||
Min.Mold height | mm | 180 | |||
Ejector stroke | mm | 140 | |||
Ejector tonnage | KN | 33 | |||
Ejector Number | piece | 5 | |||
| Max.Pump Pressure | Mpa | 17.5 | ||
pump motor power | KW | 15 | |||
Heater Power | KW | 9.75 | |||
Machine Dimension(L*W*H) | m | 4.9*1.29*1.96 | |||
Machine Weight | t | 5.3 | |||
PS Hopper Capacity | Kg | 25 | |||
Oil Tank Capacity | L | 350 |
Main features of GSV series:
1) Energy-saving. Compared with normal constant pump drive machine, the variable pump drive GSV series machine is able to save electric power consumption by 30 up to 50%, especially for the thick wall products.
2) High speed system response and short molding cycle
3) Largely decrease system oil pressure
4) Reduce mold open and close crash to extend service time of machine and mold
5) To extend service life of oil piping system, to reduce maintenance possibilities and save maintenance cost.
6) Higher requirement for hydraulic oil; provides with imported high quality oil strainer/filter