Plastic extrusion lines are used to make PVC, PE, PPR PTFE products.
1: High extruding capacity
2: high qulity products
Plastic extrusion
1: Technical parameters as follows:
Diameter of screws (mm) | 65/132 |
Material of screw &barrel | 38CrMoALA |
Surface Treatment of screw & barrel |
Coated by Bimetallic-alloy,
|
Rotate speed( r/min) | 1-39.1 |
Barrel heating power | 23.5Kw |
Vacuum pump power | 1.5kW |
Vacuum degree | -0.075Mpa |
Way of feeder | Consistent conveying by screw |
Heating range °C | 50-180 |
Heating power | 6kW |
Indicator of Melt pressure &temperature | Digital |
Gear pump flow rate | 10L/min |
Working compress | ≤0.3MPa |
Heat exchanging medium | Water |
Barrel cooling way | Inside by Oil; Outside by fans |
|
|
Main power AC motor With ABB frequency converter | 37kw |
2: We will send engineer to buyer's workshop to test machine and train workers.
If you have any questions, you are welcome. Pls contact with sophia .
3: Pictures for your reference