1).plastic injection moulding machines
1).Factory price;
2).Special design;
3).Single shuttle table;
4).Controller have USB;
Single shuttle table machine( injection machines)
1):plastic injection moulding machines
2):Single shuttle table;
3): Part of the machine's specification(can be change depend on your product):
Machine Type | Unit | CV-850D | ||
Screw Diameter | mm | 40 | 45 | 50 |
Injection Pressure | kg/cm2 | 1663 | 1316 | 1065 |
Max. shot weight | g | 160 | 203 | 250 |
oz | 5.7 | 7.2 | 8.9 | |
Screw Speed Max. | rpm | 0-176 | ||
Nozzle Retraction Stroke | mm | 220 | ||
Number of Temperature | -- | Nozzle+3 | ||
Clamping Force | tons | 85 | ||
Opening Force | tons | 10.5 | ||
Min. Mold Height | mm | 200/260 | ||
Max. Opening Daylight | mm | 450/510 | ||
Mold Plate Diameter | mm | 740*500 | ||
Ejector Stroke | mm | 75 | ||
Barrel Heating Power | kw | 5.6 | ||
Total Wattage | kw | 11.9 | ||
Oil Tank capacity | L | 240 | ||
Machine Dimension(L*W*H) | m | 2.0*1.7*3.1 | ||
Machine Weight (about) | Tons | 2.6 | ||
Vertical mode-locking and vertical injection machine. Covering a small area, easy to use, and no displacement when work piece is embedded. It is available for re-embedding small-and medium work piece.
Dual-cylinder injection device. With high injection pressure and a fast injection speed, the facility is perhaps the best choice for thin-walled past molding.
Direct Pressure Mode-Locking Device .Balanced mode-locking pressure and accurate mold matching at low pressure, it is capable of extending die life and it is expected to get accurate molding.`
It is available, according to the requirements of the characteristics of embedded part and capacity, to arrange in Paris with signal slide machine (the D series), Dual Slide Machine (the DM series), or Turntable-type Device (the R series).Such a combination enables you to get maximum output but minimum investment.
Scalable- program that is capable of communication between automation embedding device and drawing out device and is fully automated.
Patented technology of pressure increasing is available to unite using with tonnage mold-locking device.
