1,Pvc profile production line
2,import inveter
3,motor power:37kw
4,capacity:150kg/h
5,resonable price,good quality
pvc profile process flow:
raw material----conical twin-screw extruder---profile extrusion mould---cool molding die---vacuum calibration support----cutter---stacker---finished product inspecting and packing.
SPECIFICATION AND PARAMETERS:
1. SJZ65/132 Conical Double-Screw Extruder
Screw,Barrel | Screw and Barrel Material 38CrMoAlA,Nitriding, Surface Chrome plate, Nitriding Layer Thickness:0.5~0.7mm, Surface Rigidity:800~900HV |
Screw Diameter | Φ65/132mm |
Effectual Working Length of Screw | 1430mm |
Speed of Screw | 1~35rpm |
Reducer Gearbox | JC Gearbox |
Main Motor Power | 37KW Siemens Motor |
Force Feeder Motor Power | 0.75KW |
Barrel Heating Method | Foundry Aluminum Heater, include force cooling fan(SOK) |
Barrel Heating Power | 24KW |
Capacity | 200~250kg/h |
Vacuum exhaust system | Adopt 2.2KW water loop vacuum pump, contain pressure box |
Assistant Equipment | Screw interior oil temperature adjusting equipment set Join part install Xiaogan WUYUE High-Temperature Melt Material Pressure Sensor |
2. YF240 Vacuum Calibration Table
Calibration Table Length | 6 Meter |
Calibration Table Width | 1000mm |
Vacuum Pump | 5.5KW×2pcs |
Water Pump | 3KW×1pc,2.2KW×1PC |
Vacuum & Water Tie-in | Vacuum Tie-in=20pcs,Cooling Water Tie-in=20pcs |
Vortex Gas Pump Power | 0.75KW(for wind drying) |
Mould Install Rail | Adopt High Quality Aluminum Profile have T Groove |
Mould Install Rail Center Distance | 320mm |
Distance of from Aluminum Rail to Floor | 900±40mm |
Table fore-and-aft Move | Adopt 1.5KW Gearbox Speed Reducer Motor, Adjusting Distance equal to 800mm |
Table Adjusting | Up-and-down adjusting adopt worm reducer & screw adjusting Right-and-left adjusting adopt screw adjusting Table Flume Balance adjusting adopt worm reducer & screw adjusting |
3. Haul-off
Haul-off Bracket Length | 1800mm |
Haul-off Motor Power | 1.5KW×2pcs |
Haul-off Speed | 0.5~6 meter/min |
4. Cutting machine
Maximum Cut Profile Size | 240×100mm |
Saw Diameter | Φ400mm |
Cut Motor Power | 2.2KW |
Bracket Lengthways Move Distance | 600mm |
Sawdust Absorb Vortex Fan | 0.75KW |
5. Stacker
Stacker Length | 5 Meter |
Laying Board Material | 0.8mm Stainless Steel Board |
Stacking Mode | Stacking by Gas Cylinder, Adopt Limited Switch Send out Cutting Signal |