Variety plastic pipe: UPVC/MPVC/PPR/PERT pipe
Dn:20mm-800mm
THK: as per requires
Standard: GB, ISO8001/14001/18001
Specifications of plastic pipes
Material: UPVC/MPVC/PPR/PERT
Plastic pipeDn:20mm-800mm
THK: as per requires
Length: as per requires
Pand as per standard.
Standard: GB/T 10002.1-2006
Applications of plastic pipes
1.Soil and waste discharge pipelines (low and high temperature) inside buildings
2.Rainwater pipelines inside the building
3.Buried drainage pipelines without pressure on the ground
4.Irrigation pipeline
Advantage of plastic pipes:
1. Outstanding Impact Resistance
Compared with the PVC-U pipes, this material can resist point load and uneven foundations effectively.
2. Corrosion Resistance
PVC-M water pipe is an insulator of electricity and immune to electrochemical reaction caused by acids, bases, and salts which cause corrosion in metals.
3. Better Water Hammer Resistance
4. High Environmental Crack Resistance
Nice ductility and good pressure-bearing performance
5. High Flow Capacity
The smooth interior wall and low friction of PVC-M water pipe result in low resistance.
6. Sanitary and Non-toxic
There is no heavy metal additive like lead in PVC-M water pipe and it would not be covered with dirt or contaminated by bacterium.
7. Low Installation Costs
Light weight, installation with solvent cement, thread, flange, and gasket joint
8. Long Life
More than 50 years under normal conditions
9. Recycled and Environment-friendly
Properties of plastic pipes
Properties | Typical Value | |
Specific Gravity, g/cm3(20°C) | 1.35~1.55 | |
Vicat Softening Temperature, °C | ≥79 | |
Longitudinal Reversion,% (150°C) | ≤5 | |
Dichloromethane Resistance Test, (15°C, 15min) | No attack | |
Failing Weight Impact Test, TIR,% (0°C) | ≤10 | |
Tensile Yield Strength, MPa | ≥40 | |
Fitness Test for Purpose of the System | Watertightness Test | No Leakage |
Airtightness Test | No Leakage |