Welcome to B2BAGE
Multi-station Vacuum Thermoforming Machine for Cabinet Liner
Multi-station Vacuum Thermoforming Machine for Cabinet Liner

Minimum Order: 0
Quality/Safety Certification: 0.00


The line is mainly used for refrigerator cabinet vacuum thermoforming.

The line is mainly used for refrigerator cabinet vacuum thermoforming. It consists of loading station, preheating station, heating station, forming station, cutting station, uploading station, etc.

The modes are available: chain type, clamp type. The line has four working stations and five stations . According to the foaming craft, the line can be available: suction type and bubble type.

The line adopts intelligent temperature controller, servo motor drive, low-temperature air cooler and so on. High automaticity, easy operation, high efficiency, etc.

 

Max forming area: 2000mmX1000MM

Max forming depth: 650mm

Heating Power: ~303KW

Total Power: ~460KW(380V,50Hz)

Total gas consumption: ~3m3/min(0.5Mpa~0.65Mpa)

Cooling water consumption: ~20m3/h(5°C~15°C)

Forming mode: Male molding(with air pressure)

Cycle time: <36s/pcs

Sheet material: ABS, HIPS or PS

Sheet thickness: 2.5mm~6.0mm

Ads by Google



About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 B2BAGE Limited and/or its subsidiaries and licensors. All rights reserved.