Welcome to B2BAGE
JIL Magnetron Sputtering Coating Machine
JIL Magnetron Sputtering Coating Machine

Minimum Order: 0
Quality/Safety Certification: 0.00


The structure simple reasonable, the production efficiency is high, the area is small, simplicity of operator.JIL Magnetron Sput

Magnetron Sputtering Coating Machine

 

Name:JIL Magnetron Sputtering Coating Machine

Introduction: Model JIL vacuum coating machine is a vertical type non-equilibrium reaction magnetically controlled sputtering vacuum coating machine. The film deposited by this machine is enhanced in terms of density, evenness, purity and hardness. This machine is widely applied to high class decorative and functional film in such areas as watch, glasses, communication, electronic, machinery, decoration, traffic and aviation.

 

Main Features:

1. This machine has a fast depositing rate and little temperature rise, being able to well restrain sparking and target intoxication.

2. The high energy released during sputtering significantly enhances film density and adhesion.

3. Equipped with a touch screen, this machine can be controlled fully automatically or manually, which can

be toggled at any time.

4. The vacuum chamber has a huge volume and high load capacity, which results in high production efficiency.

5. The work piece rack is a revolution structure, which can be set for automatic rotation clockwise or counterclockwise, producing fairly even film.

6. The entire machine has a rational configuration, low air suction rate, low noise, and low energy consumption.

Main Configuration:

1.   The chamber, valves and pipeline of this vacuum coating machine are all made of stainless steel, Chamber size Φ1000~1800mm;   

2.   Vacuum system consist of high vacuum valve, high vacuum diffusion pump or molecular pump, roots pump, rotary piston pump, slide vane rotary vacuum pump;

3.    Coating system use 28 sets plane-target or Column-target and 28sets power source;

4.   Use one fast cycle water vapor cryopump;

5.   Inflating system has 14 sets mass flow control instrument and a gas flow display;

6.    Cooling system: there is a water pressure alarm device on this machine;

7.    The control system (touch screen + PLC) displays detailed parameters at real time and controls the entire production process fully automatically under automatic running mode.

 

Technical Parameters:

Gross weight

3500kg6000kg

Total power

80KW180KW

Suction rate (new, idling)

2×10-2Pa≤8min

Ultimate vacuum (new, idling)

≤8×10-4Pa

Gas leak rate (new, idling)

0.67Pa/Hr

Work piece rotating speed

020r/min

Ads by Google



About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 B2BAGE Limited and/or its subsidiaries and licensors. All rights reserved.