plastic vacuum thermal forming machine
1)ISO9001:2008 and CE
2)easy to operate, fine workmanship
3)high speed and accuracy
plastic vacuum thermal forming machine
Specification:
Plastic vacuum thermal foroming machine could produce kinds of packaging products by vacuum forming. It is suitable for plastic material like PVC,HIPS,PP,PE,PET,ABS etc, can be used for electronics,toys,food, lamps,luggage,shoes,medicines,cosmetic,tourism,textiles,handicrafts,etc.It adopts PLC control system,touch screen and gets reliable performance and handy operation.This machine is full-automatic forming equipment for thermoforming plastic sheet by feeding,heating,forming,cooling,cutting at one time.
Basic Units:
A)control panel
B)Temperature region
C)Switch region
Working principle
Send materials by automatic→move the material into the heating furnace,after the material to sofe→take the material to forming area→the vacuum will auto start→open the fan to cold→separate the model and material→take the material out
Excellence of Equipment:
1. Control system:Adopts PLC full automatic programmable control system,Enable to send the material,heating,forming,cooling and cutting materials automatically and work steady.
2. The heater control:The heater is made by stainless steel to avoid the same model machine which made by iron creats oxidizing iron fall down to material and make products useless.
3. Temperature control system:Infrared ray heating ceramic tile and independent control system ensure be heated even,inside place heat preservation material reduce calories lost and save energy sources more than 40 percent compare with common machine.
4. Cold breeze system:Have cooling water machine and spray fog breeze cold system no vibration and residual wind,expedite produce speed
5. Transmission system:Adopt Japanese servo system and frequency conversion technology.The electic control to pull sheet,the horsepower is strong and pulls sheet length accurate(the precision about 1 mm),use the national patent technology of ‘pull a slice of structure’.The machine can will promise that it is accurate and stable while under high speed operation.Try its best to reduce the width of the edge to save the material.
6. Vibrate to take off from mold:Can adjust 0~9 times,twice vacuum forming make sure the blister no transmutation and easy to break off from mold.
7. Twice vacuum forming:Inside place twice vacuum forming make the difficult material easy to form and increase product’s quality.
8. Alarm system:Have the product quality counter;when the plank is full it will be alarm
9. Control methods: Manual and auto methods can be chose easy to operate the machine.
Technical Data
Model | GS70/122A-A | GS70/122B-B | GS70/122C-C | |
Forming height | mm | 150 | 150 | 120 |
Forming length | mm | 1222 | 1222 | 1222 |
Forming width | mm | 760 | 760 | 710 |
Producing speed | pcs/min | 200~720 | 200~720 | 200~720 |
Elecrothermal-furnace power | KW | 30 | 30 | 30 |
Motor power | KW | 4 | 4 | 4 |
Vacuum-pump power | KW | 3 | 3 | 3 |
Air compressor | m^3/min | 2.0 | 2.0 | 2.0 |
The whole power | KW | 37 | 37 | 37 |
Power supply | V | 380 | 380 | 380 |
Machine size | mm | 7660*2720*2730 | 7660*1720*2730 | 6800*1470*2680 |
Weight | Kg | 3200 | 3200 | 3000 |
raw material
mould
sample
Machine depending on the die cutting out the corresponding sample, the above presented mould and sample may not be the same, but the truth.
You can see our website for more product information, please don't hesitate to call.
Our advantage:
Our company insists the quality first, customer supreme idea, our superiority: One year and so on maintenance, three months and so on exchange guaranteed, life-long service.