ppr pe plastic pipe welding machine you will need to install PPR pipe, Double heating element with thermostat
ppr pe plastic pipe welding machine data:
Heat Element: Double heating element with thermostat
Heating element are made of non-corrosive material
Temperature Range: 50-300 degree
Welding Diameter 20-63 mm
Voltage 220-240 V
Power: 1500 W
Foot: A special foot with clamp that enables working at any location.
Warranty: 1 year warranty
Set Include: Welding machine. Clamp Foot, Cutter, Allen Key, scewdriver , Teflon Coated Die Plates
Another note:
A-can add three sockets on the heater same time
B- On/Off switch have special illuminations to ensure easy working
C- Special foot with clamp that enables working on any location are available
Welding Note:
Cut the pipe. Push the pipe and fitting into the moulds for some time (See the table). Pull them out and insert the depth needed steadily .Please do not screw the pipes and fittings
OD (mm) | Heating Time (s) | Depth (mm) | Cooling time(min) |
20 | 5 | 14 | 3 |
25 | 7 | 16 | 3 |
32 | 8 | 20 | 4 |
40 | 12 | 21 | 4 |
50 | 18 | 22.5 | 5 |
63 | 24 | 24 | 6 |