1.name:ptfe molding powder
2.packing:25kg/barrel
3.usage:firm,seal,gasket,club,panel,axletree,seal ring,loop,etc.
4.dongyue
NO. | Item | DF-17 | |
Grade A | Qualified | ||
1 | Smoothness and Cleaness | White sheet surface, even texture, no metal residue quantity(0.5mm )≤2 | |
2 | Tensible Strength(Mpa ) ≥ | 29 | 27.4 |
3 | Elong At Rupture (%)≥ | 300 | 280 |
4 | Volume Density (g/L) | 300~450 | |
5 | Residue on Sieve (65um) (%)≤ | 3 | |
6 | Moisture Content (%)≤ | 0.04 | |
7 | Melting Point (°C) | 327±5 | |
8 | Stand Relative Density | 2.130~2.160 | |
9 | Thermal Inst. Index ≤ | 20 | |
10 | Electric Strength (KV/mm) | 60 | |
11 | For check | Execute according to requirement of HG/T2903-1997 | |
12 | For process | For Molding | |
13 | Usage | The resin can be used as the general required electric source, which is suitable for making film, the products of thin wall, seal, gasket, club, panel. Tube, axletree, seal ring, loop, filling componds etc. | |
14 | Packing, Storage, Transportation | 1 PTFE is packed in double layer PVC bags inside and in hard circular barrels outside. On the barrel, there should be attached label and quality certificate, on which there are brand, trademark, executive criterion, type, grade, lot No. and net content, pack date, checker, packager. 2 PTFE should be stored be stored in clean dry warehouse to prevent from dust, moisture,ect foreigh matters. 3 The products are transported according to non-dangerous products. Hrat, moisture, freezing and strong shock should be avoided during transportation. Over-bumpiness and compression is apt to make the resin bind together. |
| Item | DF-16 | |
Grade A | Qualified | ||
1. | Smoothnes & Cleaness | White sheet surface,even texture,no metal residue quantity (<0.5mm)≤2 | |
2. | Tensile Strength(MPa)≥ | 29 | 27.4 |
3. | Elong. At Rupture%,≥ | 300 | 280 |
4. | Volume Density,(g/L) | 300-450 | |
5. | Residue on Sieve(65um)%,≤ | 3 | |
6. | Moisture Content%,≤ | 0.04 | |
7. | Melting Point°C | 327±5 | |
8 | Standard Relative Density | 2.130-2.160 | |
9. | Thermal Ins. Index | 20 | |
10 | Electric Strength | 60 | |
11 | For Check | Execute according to requirement of HG/T2903-1997 | |
12 | For Process | For Molding | |
13 | Usage | The resin can be used as the general required electric source,which is suitable for making film,the products of thin wall,seal,gasket,club,panel, tube,seal ring, tube,filling compounds, etc. | |
14 | Packing,Storage,Transportation | PTFE is packed in double layer PVC bags inside and in hard circular barrels outside .On the barrel, there should be attached label and quality certificate, on which there are brand ,trademark, executive criterion, type, grade, lot No. and net content, pack date, checker, packager PTFE should be stored in clean dry warehouse to prevent from dust, moisture, etc, foreign matters. The product are transported according to non-dangerous products. Heat, moisture, freezing and strong shock should be avoided during transportation. Over-bumpiness and compression is adapt to make the resin bind together. |