MSR606 Magnetic Stripe Encoder/Writer/Reader
Support Hico and Loco
USB output
100%competible

MSR606 Magnetic Stripe Encoder/Writer/Reader

Magnetic stripe/swipe card encoder
Support Hico and Loco
USB output
100%competible MSR206
SKD software is available

Magnetic Card Reader/Mini portable magnetic card reader(MiniDX4) is the smallest type with the ability to save 2048 data messages. It's a battery-powered portable magnetic swipe reader, which is specially designed for magnetic stripe data collection anytime and anywhere without computer, All datas it collected can transfer to computer and write to other white magnetic cards through writer device. It is the best choice for data collectors.

Specifications
Magnetic Stripe Card:
TRACK 1 / IATA / 210 bpi / 79 Alphanumeric Characters
TRACK 2 / ABA / 75 bpi / 40 Numeric Characters
TRACK 3 / Thrift / 210 bpi / 107 Numeric Characters
RS232 Interface:
RS232, Half-Duplex, 8N1, 9600 bps
USB Interface
Full compliance with the USB Specification V 1.1
The device uses a Virtual Serial Port Driver, making it appear to have the software like a
Standard RS232 Serial Port.

CLOCK:
Real Time Clock (RTC) module and back-up capacitor
Memory Size for Storing Data:
CMOS Serial Flash Memory 512K bytes
Up to 2048 records ( 256 Bytes / Record )

Battery Power:
Rechargeable Lithium-ion Polymer Battery
Nominal Capacity: 250 mAH ( Typical )
Nominal Voltage: 3.7 V
Cycle Life: 300 cycles ( at least )
Low Battery Detect and Built-in Quick Charge Circuit
Power Supply for Charge:
DC 5V, 200mA ( for RS-232 ) or USB Powered
Charging duration time: 1.5 ~ 2.5 hr
Working duration time after charge: 48 hr ( always power on )

Environment:
Operating Temp: -0° C ~ +60° C ( Discharge )
-0° C ~ +45° C ( Charging )
Storage Temp: -10 ~ +65° C
Humidity: 10 ~ 90 % relative

Dimensions:
L78 xW20 x H 26.5 mm

Mounting:
Portable or Any surface