APGE-T Type Aluminum Parallel Groove Clamp
APGE-T Type Aluminum Parallel Groove Clamp
In General
APGE-T type Aluminum parallel groove clamp is suitable for connection of AL conductors according to DIN 48201 and ACSR conductors according to DIN 48204 and it can be used with insulation cover to provide insulation protection. The following is the introduction to the materials used in the clamp.
Body: high strength and corrosion-resistant Aluminum 99.5.
Bolts: DIN 933, steel 8.8, dacromet.
Nut: DIN 934, dacromet, pressed into lower part.
Pressure pad: Aluminum alloy.
Spring washers: DIN 127, steel.
Conical washers (according to order): DIN 6796, corrosion-protected.
Stainless steel A2 bolts and nuts available according to order.
Detailed Specification
Type Model | Applicable Conductor Section (mm2) | Applicable Conductor Diameter (mm) | Bolt Number | |
AL | ACSR | AL | ||
APGE-T16-150 | 16-150 | 16/2.5-120/20 | 5.1-15.7 | 3 |
APGE-T35-240 | 35-240 | 35/6-240/40 | 7.5-20.3 | 3 |
APGE-T25-75 | 25-75 | 25/4-70/12 | 6.3-10.5 | 3 |
Note
The specification listed above is for reference. The product can be customized according to order.
