COPPER OR ALUMINIUM CONDUCTOR/ XLPE INSULATION/ARMOURED OR UN ARMOURED /PVC OR PE SHEATHE PVC INSULATED LOW VOLTAGE CABLE

PVC INSULATED POWER CABLE

1. STANDARDS

THE PRODUCTS ARE MAINLY COMPLYING WITH IEC 60502 STANDARD,  ALSO CAN BE PRODUCED ACCORDING TO OEM REQUIREMENTS AND OTHER STANDARDS, SUCH AS BS STANDARD, DIN STANDARD, ASTM STANDARD, ETC.

2. VOLTAGE GRADE

LOW  VOLTAGE  CABLE

LOW VOLTAGE (0.6/1 KV) SINGLE CORE OR MULTI-CORE/ COPPER OR ALUMINIUM CONDUCTOR/ PVC INUSULATION/ STEEL TAPE ARMORED OR GALVANIZED STEEL WIRE ARMORED OR UNARMORED/ PVC OUTER SHEATH POWER CABLE.

3. CABLE'S CHARACTERISTIC:

3.1 LONG TIME OPERATING TEMPERATURE FOR CABLE CONDUCTOR IS 70 DEGREES.

3.2 THE HIGHEST TEMPERATURE OF THE CONDUCTOR IN SHORT CIRCUIT (NO LONGER THAN 5 SECONDS) IN NOT MORE THAN 250 DEGREES, IF A JOINT IS IN THE CABLE, THE TEMPERATURE OF THE TINNING WELDING JOINT IS NOT MORE THAN 120 DEGREES, COMPRESSING JOINT NOT MORE THAN 150 DEGREES AND ELECTRO-WELDING JOINT NOT MORE THAN 250 DEGREES.

3.3 NO DROP IN LIMITED PROVIDED THERE IS FULL MECHANICAL TENTION WHEN CABLE IS LAID. IT IS FORBIDDEN TO LAY CABLE IN IRON-PIPE OR TO FIX CABLE BY CIRCLING AROUND THE CABLE WITH IRON MATERIALS.

3.4 BEING LAID, THE MINIMUM TEMPERATURE OF THE CABLE SHALL NOT BE LOWER THAN ZERO DEGREE. IN THE CASE OF LOWER TEMPERATURE, HEATING MEASURES SHALL BE TAKEN.

WE CAN ALSO SUPPLY THE OEM AND CUSTOMIZED PRODUCTS ACCORDING TO YOUR REQUEST!