Welcome to B2BAGE
PVC insulated PVC sheathed electric cable wire
PVC insulated PVC sheathed electric cable wire

Minimum Order: 0
Quality/Safety Certification: 0.00


1.the cable is manufacturer according Eg toEg toE1 GB12706-91 OR IEC60502
2."National Industrial Products Production Permit

Description

Circular compacted copper or Aluminium conductor, PVC insulated, under-sheath, three cores assembled together with filler and extruded with PVC outer sheath.

Standards

The cable is manufactured according Eg to E1 GB12706-91 or IEC60502.It is suitable to be installed in the four wires system with rated voltage of 0.6/1KV for transmitting electricity.

 

TYPE DESCRIPTION AND APPLICATION  

Ordinary typeFlame retardant typeDescriptionApplication

     VV

     VLV

     ZR-VV

     ZR-VLV

PVC insulated PVC sheathed power cableFor laying indoors in tunnels and ducts unable to external mechanical forces

   VV22

   VLV22

    ZR-VV22

    ZR-VLV22

PVC insulated PVC sheathed steel tape armored powerFor laying indoors in tunnels and ducts able to external mechanical forces

    VV32

    VLV32

    ZR-VV32

    ZR-VLV32

PVC insulated PVC sheathed streel tape armored powerFor laying indoors, in shafts and in water, able to bear moderate pulling forces

 

Specifications

Core numbers  1 core  2 cores  3cores 4cores  5cores

Nominal cross-sectional area  1.5    2.5    4     6    10    25   35   50    70   95   120    150   185   240   300                       400 500    630  2*25     2*35    3*120   3*185     3*300     3*4+1*2.5          3*10+1*6          4*4       4*6     4*16    4*25    4*70+1*35       4*150+1*70

Operation characterisitic

The maximum operating temperature of cores shall not exceed 70°c when the cable is used for long period. T he temperature of cores shall not exceed 160°c   at short circuit for 5 seconds. the amnient temperature of cores shall not be below 0°c during installation. the minimum-bending radius shall not be less than 10 times of the cable diameter when lying. the single cable should not be laid in magnetic ducts when it is electrified with alternating current.

 

 PRODUCT DATE TABLE

 

Nominal cross section

Nominal insulation thickness

Sheath insulation thicknessCalculated diameter+25 Carrying capacity of air laying(A)

Approximate weight of finished product

Laying in the air

 

PRODUCT STRUCTURAL DIAGRAM   

 

Ads by Google



About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 B2BAGE Limited and/or its subsidiaries and licensors. All rights reserved.