Overhead line fitting/ pole line fitting/ line fitting
Malleable cast Iron Line fitting
hot forged line fitting
ISO1461

 Line fitting/ pole line fitting/overhead line fitting

Material ----Malleable cast Iron Line fitting/ pole line fitting/overhead line fitting  
Minimum Fail load---70KN Min load Line fitting/ pole line fitting/overhead line fitting
ISO 1461   

Pictures of the Line fitting/ pole line fitting/overhead line fitting

  

    

 

Drawings of the Line fitting/ pole line fitting/overhead line fitting

 

  

 Dimensions of the Line fitting/ pole line fitting/overhead line fitting --D-Iron
:

The dimensions on the drawings are the final dimensions after the hot dip galvanization. The design of the fittings is indicative; however the mentioned dimensions on the drawings are the critical ones.

GALVANIZATION of the Line fitting/ pole line fitting/overhead line fitting --D-Iron
The fittings shall be delivered hot dip galvanized according to the following specifications:

The Zinc that shall be used shall have the quality of minimum category prime western according to  the category Zn 98.5 according to ISO-1461.Then washed out with water and then flux treated and dried out.The hot dip galvanization shall be made in a Zinc bath of temperature 450°C and of Zn-composition min. 98,5%.The galvanization thickness shall be in average 86μm thick! On an isolated piece or on a small part of the surface the thickness can be a little lower, however on all pieces and on all surfaces the minimum thickness shall be 78μm and the average weight in relation to the galvanized area shall be 610 gr/m2.The pieces shall be after HDG free from black stains, enclosures of dirt, knobs, bubbles or any other surface defects. The HDG shall be smooth and uniform in the entire piece without any spots with too small or too big galvanization thickness otherwise the pieces will be rejected.The galvanization shall stick very well on the steel structure; it shall not be removed as a film but shall be as one with the steel body

Testing of the Line fitting/ pole line fitting/overhead line fitting :

The fittings shall be fixed in a mechanical testing device as similar as possible with the assembly later during use

PACKING OF THE Overhead line fitting/ pole line fitting/ line fitting
:

All materials shall be packed in wooden / bags cases of maximum weight of every wooden box 25 kg. The wooden cases shall be suitable for the transport of the pieces without damaging the galvanization, and shall allow air to circulate and the used wood shall be completely dry in order to avoid any corrosion of the fittings.

 

Contect: Kelly Hao
HeBei TuoFa Telecommunication And Electric Equipment Manufacturing CO.,LTD

Hebeipu industry area, Yongnian town,
Han dan city, HeBei province, China
Mobile: +86-18732733098

 Skyp:hebeituofa