Welcome to B2BAGE
SHD Differential Pressure Gage
SHD Differential Pressure Gage

Minimum Order: 0
Quality/Safety Certification: 0.00

Accuracy +/-2.5 of full scale
Pressure Limits -70 to 100 KPa
4 inch diameter dial face
Temperature 20 to 140F

Differential Pressure Gage

The gage is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with
bubbler systems and pressures in fluid amplifier or fluidic systems. It also checks gas-air ratio controls and automatic valves, and monitors blood and respiratory pressures in medical care equipment.

Service: Air and non-combustible compatible gases. (Natural
Gas option available.)
Housing: Die cast aluminum case and bezel, with acrylic
cover, exterior finish is coated gray
Accuracy: ±2.5% of full scale
Pressure Limits: -70 to 100 KPa
Size: 4" diameter dial face
Temperature Limits: 20 to 140°F (-6.67 to 60°C)
Mounting Orientation: Diaphragm in vertical position
Connections: 1⁄8" NPT(F) high and low pressure taps,
duplicated-one pair side and one pair back
Weight: 240-500g
Standard accessories: 1 m connecting tube, two 1⁄8" NPT plugs for duplicate pressure taps, two1⁄8" pipe thread to rubber tubing adapters and three flush mounting adapters with 3 screws


Related Products
Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 B2BAGE Limited and/or its subsidiaries and licensors. All rights reserved.