Welcome to B2BAGE
New types 2902 UV varnish for printing solvent ink
New types 2902 UV varnish for printing solvent ink

Minimum Order: 0
Quality/Safety Certification: 0.00


Common UV Varnish LC-29021 Solvent ink
1 Used only on paper,
2 It has high-brightness, fastness,
3 High wear resistance,

Abstract:

Common UV oil with epoxy acrylic resin as its main body, and has some solvent (10±2%). After the ultra-violet (UV) radiation it will be cured into a stable state. Used only on paper, it has high-brightness, fastness, high wear resistance, fast curing, and other characteristics with a certain odor, little stimulation, and strong adhesion to the paper substrate. Containing the appropriate amount of toluene, please choose according to production needs.

General properties:

Appearance: Transparent yellowish clear liquid, slightly turbid in summer

Viscosity:  33±3s/ (Viscosity cup 4, 25°C)

Non-volatility:  90%±2%

Acid: Below 1

Cure rate: 40-80Ft/Min/80W/Cm/Lamp (80 MJ/cm2)

Glossiness: 90±2 degree

Solvent content:8%±2%

Use:

Order form suggested:Best adhesion in ordinary UV varnish, beseem magazine
cover use copperplate paper, less wear resistance

Roller coating

Different kinds of packaging products etc External packing, label, magazine

Notice:,

a) Excessive or uneven powdering will reduce adhesion and brightness;

b) Some inks will repel the UV oil, resulting bad viscosity or poor adhesion strength, and even makes the ink color changes, this case can be improved by printing base oil (LC-1545, 1515);

c) The varnish must be completely cured, or it will cause a lot of after-effects: such as the light faded color change, can not resist rubbing, get sticky, and so on;

d) Paper will become less viscously, so particular attention should be paid to the selection of the paste and the paste operations to ensure quality;

e) UV lamp should be cleaned regularly, check with the cleanness of blade and steel wheels to avoid that the paper sticks as the varnish on the back;

f) UV oil should keep away from light and heat to prevent it from hardening.  

Security issues:

1) After curing, this product is not toxic and irritative, but should be cleaned with a basic soap at least 3 times in 30 minutes after skin contacts. Change clothes attached to avoid skin burn caused by a long time attachment;

2) Keep the workplace in good ventilation, cooling, fireproofing at the same time.

Packages:

200kg drums

100kg drums

 

 

Ads by Google



About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 B2BAGE Limited and/or its subsidiaries and licensors. All rights reserved.