High quality toner ink
1.Sheetfed screen toner printing ink
2.A Grade, high glossy
3.High at 13000 sheets per hour
high quality toner Ink Technology Data:
2 ) Viscosity 25 ,CPS :500015000 cps .( 25, NDJ model viscosity meter)
3) Finess ≤15um .
4) Solids content: above 99%.
5) Drying conditions: 15-55m/min (120w/cm ,3 pcs medium pressure mercury lamps).
6) Storage period: 12 months.
Silk Screen Printing Ink Instructions:
7) Screen tone 250-400 meshcount. Doctor hardness is 70°.
8) You may proper dilute the products (5-20%) according to local requirement. (We have professional dilute)
9) It must be test before manufacture, confirm quality and then printing.
10) Please fully mixed before printing or diluting.
11) It must be drying after varnished on the press work .Or not , it will be set off and not easy adhere .
12) Storage condition: avoid high temperature and sunshine from penetrating directly. Preserve in the shady and cool place.
1.Scope: all kinds of ABS, PC, PS materials or UV oil coating over the ABS, PS, PC, hardware, plating, surface printing.
2. ink properties: UV curing ink, excellent adhesion, high resistance to alcohol, high wear resistance, can also be screen printing.
3.Storage: room temperature 20 °C sealed from light, valid for six months, the ink on the plate so as not to fall back to the original tank, plus ink over the curing agent must complete four hours use, continued use may affect performance.
4.Features: an ultraviolet curing, high gloss, dimension, solvent, flow is good hygiene, environmental protection, do not plug network, construction, high efficiency, all the basic colors.
5.Technical Parameters:
a, graphic print gloss, 85 °C, viscosity 20000;
b, use gauze: 40T-180T;
c, 3000W power of ultraviolet light curing instant;
d, light cured, for 24 hours of testing SONY rubber edge wear 100 times more than 1000g, 1000g force 200 times more resistant to alcohol test
6. using the methods and precautions:
a, the ink should be kept below 25 °C dark save for a period of six months, 5 °C dark save for one year;
b, curing light intensity and the conveyor speed can be adjusted to a cure shall prevail;
c, thick ink will affect the cure speed;
d, in conjunction with other series of ink formulation and mix;
e, construction of environmental illumination should not be too strong.
f, unused ink should be promptly tightly
7.product characteristic
1)Bright in colors,density is high,dots is clear.
2)Be good in adhere to the paper,dry fast in the paper but not in the printing machine.
3)Low toxicity,no smell,low in hydrocarbon etc.
4)The wear-ability is good,suitable for printing at a high speed.
5)The adaptability of the printing ink is good,the printing rotation of ink and stability is good.
