PLASTISOL, also known as Plastisol Ink, oily mortar; Non-ink solvent for resins, resin main components

1. The appearance of a pasty consistency with thixotropy, when placed over a thick, stirring become rare. Temperature will affect the viscosity, and in the summer low viscosity, the ink is relatively rare, and in the winter the contrary.

2. Solid ink is non-thermal solvent at room temperature with minimal volatile, heated to a certain temperature, curing and crosslinking reaction happen, so not drying at room temperature, which will greatly facilitate the use and storage of cure, forming a flexible PVC film. and closely integrated with fiber analysis. Has also given itself the following characteristics : not a Cypriot network; Work wash version; 350 head can be used to print up to 8 lines -- above the pictorial fine; India sets of wet wet continuous printing network can be increased efficiency. Printing can breathe better handle soft; Mortar not wasted -- spent less than 1/3-1/2; flexibility with stretching, Attachment wet wash fastness of up to 5, above the level of 4 dry rub; dark, light-colored fabrics may printing; species diversity. Many can print three-dimensional Cartesian, rounded stones and other special effects products. Ink both hot water slurry, mortar and traditional solvent-based ink advantages : and the level of detail and special printing effects, other printed materials that can not be attained, the scope of application : PLASTISOL applied to 100% cotton and cotton / polyester blend, polyester, deep colored fabrics, denim and other fabrics. Where the fabric can be used to meet the following two points : 1, 150 ° C;2 ability, permeability, Ink can infiltrate into account. For example, the printer is not suitable material : plastic, metal, glass and the handling of waterproof nylon. PLASTISOL necessary for the use of the mixture of heat treatment, heating the plastic resin absorption surrounding solvent, and plastic into laminate plastic Alliance began in 80-120 ° C, the semi-called flash drying or drying is aimed Nonstick version. The sudden temperature is 140-160 ° C for complete drying, curing only full, thorough drying ink can cure! Very important role in treatment, almost 90% of the issue, with the baking. Attention to the following aspects : 1. Fastness not affect handling, Water Ink will be at the peeling flexible enough to split easily pulled constantly widening. 2. In a suitable temperature, the ink film can be fully developed.